Quick Answer
Install the PETKIT Magnetic Dustproof Curtain 3.0 by aligning the magnetic strips with the opening of your PUROBOT MAX PRO 2 or PUROBOT MAX 3, then letting the curtain close automatically. The whole setup takes under five minutes and requires no tools.
Why the Magnetic Curtain 3.0 Is Different
The Magnetic Dustproof Curtain 3.0 is built for the PUROBOT MAX PRO 2 and PUROBOT MAX 3 litter boxes. Its upgraded magnetic closure is the key change from earlier versions: the curtain opens when your cat nudges it and snaps shut on its own, so dust and odors stay inside the unit between uses. The translucent material also keeps the interior visible, which matters if you rely on the built-in camera to check on your cat remotely.
One trade-off to consider: the magnetic seal works best when the curtain is installed on a clean, flat surface. If the frame has litter residue or the magnets are misaligned, the curtain may not close fully, so it is worth wiping the mounting area before you start.
Installation Steps
- Prepare the mounting area: Clean the top edge and sides of the litter box where the curtain will attach. Wipe away dust or litter residue so the magnetic strips and adhesive surfaces seat firmly. A dry, clean surface prevents the curtain from slipping or losing adhesion during the first few days.
- Align the magnetic strips: Position the curtain so the magnetic edges line up with the opening of the PUROBOT MAX PRO 2 or PUROBOT MAX 3. Check that the magnets face each other correctly before pressing them into place. If the curtain doesn't close on its own, realign the strips; magnets only work when the poles match.
- Secure the curtain to the litter box frame: Attach the curtain along the top or sides of the litter box using the provided mounts. Press firmly and make sure the curtain hangs straight, with no folds blocking the opening or the camera view. Test the magnetic closure by letting the curtain snap shut a few times before use.
- Check the camera view and light: The translucent material is designed to let natural light in without blocking the built-in camera view. Confirm the curtain does not sit in front of the camera lens or fold over the sensor area. If the camera view is blocked, adjust the curtain's position or trim the mounting clips rather than forcing the material.
- Test your cat's entry and exit: Let the curtain close and then gently push it from the inside to verify the magnetic closure opens easily and snaps back. Watch your cat use the litter box once or twice to confirm it opens without hesitation. If your cat hesitates, keep the curtain propped open for a few days, then lower it gradually.
Product facts
-
Magnetic Dustproof Curtain 3.0: The PETKIT Magnetic Dustproof Curtain 3.0 is designed to fit seamlessly with the PUROBOT MAX PRO 2 litter box and PUROBOT MAX 3, using an upgraded magnetic closure that opens effortlessly for cats and closes automatically. This means the curtain works without your cat having to push through a stiff flap, so even cautious cats adapt quickly and the door seals itself after each use.
Magnetic Dustproof Curtain 3.0
-
Magnetic Dustproof Curtain 3.0: The translucent material allows natural light in without blocking the built-in camera view. You can keep an eye on your cat through the litter box camera while still containing dust and odors.
