Quick Answer
Install the TRX Invizi-Mount by mounting the steel plate like a photo frame holder on a wall stud or with drywall anchors. Once secure, hang your Suspension Trainer straps and start your workout.
Why Choose the TRX Invizi-Mount
The TRX Invizi-Mount is designed to blend into your room when not in use, doubling as a photo hanger. It provides a sturdy anchor point for your suspension trainer without permanent fixtures, making it ideal for renters or those who want a clean look.
Tools You'll Need
You need a drill, a stud finder (optional but recommended), a screwdriver, and the included mounting hardware. If you cannot mount into a stud, use heavy-duty drywall anchors rated for at least 300 lbs.
Installation Steps
- Choose the Mounting Location: Select a spot on a wall with enough clearance for full-body suspension exercises. Use a stud finder to locate a wall stud for the strongest hold. If no stud is available, plan to use heavy-duty drywall anchors. Avoid mounting near windows, doors, or corners where you might hit obstacles during exercises.
- Mark and Drill Pilot Holes: Hold the Invizi-Mount plate against the wall and mark the screw holes through the plate. Drill pilot holes at your marks. If using drywall anchors, insert them into the drilled holes before proceeding. Make sure the pilot holes are straight and deep enough to avoid stripping the screws.
- Attach the Mount Plate: Align the mount plate over the holes and drive the screws in using a screwdriver or drill. Tighten until the plate is flush against the wall, but do not overtighten as this can damage the drywall or strip the screw head. Check that the plate is level before fully tightening; an uneven mount can cause the trainer to hang crooked.
- Hang Your Suspension Trainer: Clip the suspension trainer carabiner onto the Invizi-Mount anchor loop. Give it a firm tug to ensure it's secure before starting your workout. Adjust the trainer straps to your desired length. Always test the anchor with your body weight before performing dynamic movements.
Product Details
-
TRX INVIZI-MOUNT: The TRX Invizi-Mount is a versatile anchor solution that turns any room into a home gym. It mounts like a photo frame holder and hides your suspension trainer when not in use. This means you can install it in a living room, bedroom, or office without sacrificing aesthetics, and it's easy to remove or reposition.
TRX INVIZI-MOUNT
