Quick answer
Keep your Half Face Blades knife in top shape with simple, regular care: clean G10 handles with mild soap and water, maintain Cerakote with a gentle wipe, and oil the S45VN steel blade after use.
Why regular maintenance matters
Your Half Face Blades knife is built to cut deep, but even the toughest materials need attention. G10 handles resist moisture and impact, but they can trap dirt and oils that affect grip. Cerakote protects the blade from corrosion, yet abrasive cleaners can wear it down. A few minutes of care after each use keeps the knife looking and performing like new.
What about the Allen bolts?
Allen bolts on the handle are functional and durable. They rarely need maintenance beyond a check for tightness. Over-tightening can strip the threads, so just ensure they are snug, not torqued. If you ever need to replace them, the process is straightforward, but for routine care, a quick visual inspection is enough.
Step-by-step care routine
- Clean the G10 handle: Rinse the handle under warm water to remove loose debris. Apply a drop of mild dish soap to a soft brush or cloth and scrub the textured G10 surface. Rinse thoroughly and dry with a lint-free towel. Avoid soaking the handle for long periods. Common mistake: using harsh solvents or abrasive pads can dull the G10 texture over time.
- Wipe the Cerakote blade: After cleaning the handle, wipe the blade with a damp cloth to remove any residue. For stubborn grime, use a small amount of isopropyl alcohol on a soft rag. Dry the blade completely with a clean cloth. Checkpoint: never use steel wool or scouring pads on Cerakote—they can remove the coating.
- Oil the blade steel: Apply a light coat of food-grade mineral oil or a dedicated knife oil to the S45VN blade. Use a clean cloth to spread it evenly, then wipe off any excess. This protects against moisture and keeps the edge ready for use. Common mistake: over-oiling can attract dust and lint. A thin, even layer is all you need.
- Inspect and store: Check the Allen bolts for tightness. If any are loose, tighten them gently with the correct hex key. Store the knife in its Kydex sheath in a dry place, away from high humidity or direct heat. Checkpoint: storing the knife in the sheath prevents accidental damage and keeps the edge protected.
Product facts
-
Gula Gula- Black G10, Midnight Bronze Cerakote, Allen Bolts, Textured Grip: This knife features a 3.1-inch S45VN American steel blade with a Cerakote finish and a Black G10 handle with textured grip. S45VN steel holds an edge well but benefits from light oiling after cleaning, while the Cerakote finish is best cleaned with a soft cloth and mild soap to avoid scratching.
Gula Gula- Black G10, Midnight Bronze Cerakote, Allen Bolts, Textured Grip
