Quick Answer
Replacing the OctaLock lid on your Hopsulator Slim is straightforward. Remove the old lid by unscrewing it, clean the rim, align the new lid's threads, and tighten until snug.
Why You Might Need to Replace the OctaLock Lid
Over time, the lid's seal can wear out from daily use, or you may want a different color to match your style. The OctaLock lid uses a BevLock seal for leakproof performance, but if you notice drips or difficulty securing the lid, replacement is the fix.
The new OctaLock Slim lid is designed specifically for the Hopsulator Slim body, so you get a perfect fit. It's also a chance to upgrade to the latest thread system for easier twisting.
What You'll Need
You only need the replacement OctaLock lid and your Hopsulator Slim. No tools required. Make sure the lid is compatible—the OctaLock Slim lid works with all Hopsulator Slim sizes.
Step-by-Step Replacement Guide
- Step 1: Remove the Old Lid: Unscrew the existing OctaLock lid from your Hopsulator Slim by turning it counterclockwise. If it's stuck, run warm water over the lid to loosen it. Common mistake: twisting too hard can damage the threads. Use gentle, steady pressure.
- Step 2: Clean the Rim: Wipe the rim of the can cooler with a damp cloth to remove any residue or moisture. A clean surface ensures the new lid seals properly. Checkpoint: make sure the rim is completely dry before installing the new lid to avoid mold or leaks.
- Step 3: Align the New Lid: Place the new OctaLock lid on top of the Hopsulator Slim, aligning the threads. The lid should sit flush without force. Common mistake: cross-threading. If it doesn't start easily, remove and realign.
- Step 4: Tighten the Lid: Turn the lid clockwise until it's snug. Do not overtighten—the BevLock seal creates a leakproof barrier without excessive force. Checkpoint: test the seal by turning the can cooler upside down over a sink. If water leaks, tighten slightly more.
- Step 5: Final Check: Ensure the lid is secure and the gasket is visible around the rim. Use the OctaLock thread system's tactile feedback to confirm it's locked. If the lid still leaks, inspect the gasket for damage and ensure it's seated properly.
Product Fact
-
Hopsulator Slim OctaLock™ Lid | Nightfall Blue: The new OctaLock Slim lid features a 100% leakproof BevLock lid to convert your Hopsulator Slim into a tumbler, and an OctaLock thread system for easy twisting. This means you get a reliable seal that prevents spills, and the improved threads make attaching and removing the lid smoother than older designs.
Hopsulator Slim OctaLock™ Lid | Nightfall Blue
