Quick answer
To replace the shock mount back on your RC car, remove the old mount, clean the area, install the new mount with the correct orientation, and secure it with the proper screws.
Why the shock mount back matters for suspension performance
The shock mount back connects the rear shock absorber to the chassis, playing a key role in how your RC car handles bumps and turns. A worn or broken mount can cause poor suspension response, uneven tire wear, or even damage to the shock itself.
Replacing it promptly restores consistent damping and prevents further wear on related parts. While the process is straightforward, getting the mount orientation or screw torque wrong can lead to premature failure.
Step-by-step replacement guide
- Remove the old shock mount back: Use a small Phillips or hex screwdriver to unscrew the bolts holding the shock mount back to the chassis and shock absorber. Keep the screws organized. Check if the old mount is cracked or bent – if so, inspect the surrounding chassis for damage.
- Clean the mounting area: Wipe away dirt, oil, or debris from the chassis and shock eyelet using a clean cloth or isopropyl alcohol. A clean surface ensures the new mount sits flush. Avoid using excessive force; leftover debris can prevent proper alignment.
- Position the new shock mount back: Align the new Carrera Shock Mount Back with the chassis holes and the shock eyelet. Ensure the mount’s orientation matches the original – the wider side typically faces outward. Double-check the orientation before tightening – reversing it can bind the suspension.
- Secure with screws: Insert the screws and tighten them evenly using a hand screwdriver. Do not overtighten – snug is sufficient to avoid stripping threads or cracking the mount. If the screws feel loose after tightening, apply a drop of thread-locker (blue) to prevent vibration loosening.
- Test the suspension movement: Move the rear suspension up and down by hand. It should travel smoothly without binding or excessive play. If it sticks, loosen the screws slightly and recheck alignment. If binding persists, the mount may be misaligned or the shock eyelet may be damaged – repeat steps 2-4.
Product facts
-
Shock Mount Back: The Carrera Shock Mount Back is listed as a Standard spare part for RC vehicles under the Carrera brand. Using a genuine Carrera part ensures correct fitment and material quality, reducing the risk of misalignment or quick wear.
Shock Mount Back
