Quick Answer
To replace your SodaStream CO2 cylinder, remove the empty cylinder, take it to a participating retailer or use the mail-in exchange, and swap it for a full one. The process takes less than a minute and ensures your sparkling water maker is always ready.
Why Exchange Instead of Refill?
The SodaStream cylinder exchange is designed for convenience: you swap your empty CO2 cylinder for a full one, avoiding the wait and hassle of a refill. It also ensures you always have a spare on hand, so you never run out of fizz mid-recipe.
One trade-off is that you don't get to keep the same cylinder; you receive a full one in exchange. This is a standard practice that keeps the process quick and safe, and it means you always have a cylinder that meets SodaStream's quality standards.
Know Your Cylinder Type
SodaStream CO2 cylinders come in two connection types: Quick Connect and Screw In. It's important to know which one your sparkling water maker uses, because the exchange program offers both types. Using the wrong type can damage your machine or cause a poor seal.
Check the base of your current cylinder or your machine's manual to identify the connection type. If you're unsure, the exchange program's product page lists both options, so you can select the correct one when ordering.
Step-by-Step Cylinder Replacement
- Remove the empty cylinder: Turn your sparkling water maker off and detach the cylinder by twisting it counterclockwise (Screw In) or pulling the release latch (Quick Connect). Lift the cylinder straight up and out of the machine. Always detach with the machine off to avoid accidental carbonation.
- Check the cylinder type: Look at the top of the cylinder to identify whether it's a Quick Connect or Screw In type. This ensures you order the correct replacement. Mismatching the type can prevent the cylinder from fitting properly.
- Order or visit a retailer for exchange: Use the SodaStream cylinder exchange online or visit a participating retailer. Bring your empty cylinder and exchange it for a full one of the same type. Check retailer participation beforehand to save a trip.
- Insert the full cylinder: Align the new cylinder with the machine's connection point. For Screw In, twist clockwise until snug; for Quick Connect, push down until it clicks into place. Do not overtighten; hand-tight is sufficient for Screw In.
- Test the carbonation: Carbonate a bottle of water to ensure the cylinder is properly seated and producing consistent fizz. If you hear a hiss or see bubbles escaping, re-check the connection. A quick test prevents wasted CO2 and ensures your first drink is perfectly sparkling.
Product Facts
-
Cylinder exchange: The SodaStream USA Cylinder Exchange provides a convenient way to replace empty CO2 cylinders with full ones, available in both Quick Connect and Screw In connection types. You can choose the exact cylinder type that matches your sparkling water maker, ensuring a secure fit and consistent carbonation.
Cylinder exchange
