Quick answer

You can replace the male shoulder strap clip on your Chekoh Clip Carrier in under five minutes using the official Replacement Clip. Focus on proper webbing alignment and clip orientation to avoid a loose or misaligned fix.

When you need a replacement clip – and when you don’t

Accidents happen: a clip snaps after a fall, a strap gets caught in a car door, or everyday wear finally shows. The male clip (the piece that inserts into the female side) is the part most likely to break because it takes the most tension when adjusting the carrier.

If your carrier’s female clip or the webbing itself is damaged, a replacement clip won’t help. In that case, contact Chekoh support about a full repair or warranty. This guide is only for replacing the male shoulder strap clip.

Step-by-step replacement guide

  1. 1. Remove the old clip: Unthread the shoulder strap webbing from the broken male clip. Slide the clip off the webbing completely. If the clip is still partially attached, cut the strap loop – but avoid cutting the webbing itself. Common mistake: trying to pry the clip open instead of unthreading the webbing. This can damage the strap edge.
  2. 2. Thread the new clip: Feed the end of the shoulder strap webbing through the slot on the new male clip. Push the webbing all the way until the clip is seated at the folded end of the strap, leaving no slack. Checkpoint: ensure the clip’s release button faces outward (away from your body) before securing the final fold.
  3. 3. Secure and test: Fold the webbing back and tuck the tail under the clip’s bar (if present) or use the built-in keeper loop on your carrier. Tug firmly on the strap to confirm the clip doesn’t slide. Then snap the male clip into the female side and adjust the strap to your usual length. If the clip feels loose after snapping, unthread and re-do step 2 – the webbing may not be fully seated in the slot.

What you’ll need

  • Replacement Clip - Shoulder Strap 'Male': Replacement Clip - Shoulder Strap 'Male' is designed to seamlessly replace the male clip on your Chekoh Clip Carrier shoulder strap. Using the exact OEM clip ensures the buckle snaps securely and the webbing slot matches your carrier’s strap width and thickness.

    Replacement Clip - Shoulder Strap 'Male'

    Replacement Clip - Shoulder Strap 'Male'