Quick answer
Use the SlideLock Carabiner Bungee to secure a load by hooking the locking carabiners to anchor points and adjusting the tension. The locking mechanism prevents accidental release, making it more reliable than standard bungee cords.
Why the SlideLock Carabiner Bungee stands out
Standard bungee cords can slip or unhook under vibration, especially on vehicles or trailers. The SlideLock Carabiner Bungee integrates a locking carabiner at each end, so the hook stays closed until you manually slide the lock open. This design reduces the risk of the cord coming loose during transit.
Because the carabiners lock, you also avoid the common frustration of the hook bending or popping off an anchor point. The bungee itself provides stretch to absorb road bumps, while the locking ends give you peace of mind that your load will stay put.
How to secure a load step by step
- 1. Choose the right length: Select a SlideLock Carabiner Bungee long enough to reach both anchor points with moderate stretch. A bungee that is too short will be overstretched and may snap; one that is too long won't hold the load tight. Measure the distance between anchor points and add 10–20% for the bungee's stretch range.
- 2. Hook the first carabiner: Open the locking sleeve on one carabiner, clip it to a solid anchor point (e.g., a tie-down ring, rail, or frame), then slide the sleeve back to lock it. Common mistake: forgetting to lock the sleeve, which leaves the hook vulnerable to accidental release. Always double-check that the sleeve is fully engaged after clipping.
- 3. Stretch and hook the second carabiner: Pull the bungee across the load so it has slight tension, then clip the second carabiner to the opposite anchor point. Lock the sleeve. The bungee should be snug but not overly tight—excessive tension can damage the cord or cause it to snap. If the bungee feels loose, use a shorter length or add a second bungee for extra security.
- 4. Test the load: Give the load a firm push or shake to ensure it doesn't shift. Check that both carabiners remain locked and the bungee isn't rubbing against sharp edges. If the load moves, reposition or add another bungee. Recheck the tension after the first few miles if you're transporting on a vehicle—vibration can settle the load.
Product facts
-
SlideLock® Carabiner Bungee: The SlideLock Carabiner Bungee integrates a locking carabiner at each end for quick and confident securing, bundling, and transporting of items. You don't need additional tools or knots—just hook and lock, making load securement faster and more secure than with standard bungee hooks.
SlideLock® Carabiner Bungee
