Quick Answer

Setting up your cot bed drawer bundle takes about 45 minutes with two people. Lay out all parts, follow the frame assembly first, then attach the drawer runners and mattress support. Always tighten screws fully before moving to the next step.

What You Need Before Starting

Before you open the box, clear a large floor area and lay down a soft blanket to protect the wood finish. You will need a crosshead screwdriver (not supplied) and a soft mallet if the instructions call for dowel pins. The Mokee Mini Cot Bed comes with FSC-certified solid beechwood parts that are heavy but easy to handle with two people.

Check that your bundle includes the cot bed frame, the drawer kit, the natural mattress, and all hardware. If any piece is missing, contact the retailer before starting assembly.

Common Mistakes to Avoid

The most frequent error is overtightening screws before the frame is square. Leave all bolts finger-tight until the entire frame is assembled, then go back and tighten everything. Another mistake is installing the drawer runners on the wrong side—check the instruction diagram for left or right orientation based on your room layout.

Do not use power tools on the beechwood frame. The high torque can strip the screw holes or crack the wood. Hand tools give you better control and prevent damage.

Step-by-Step Assembly Guide

  1. Step 1: Attach the Side Panels to the Headboard: Place the headboard flat on the floor with the decorative side facing down. Insert the cam dowels into the pre-drilled holes on the side panels, then align the side panels with the headboard and tighten the cam locks clockwise. Check that the cam lock arrows point toward the panel edge before tightening. If they point outward, the panel is reversed.
  2. Step 2: Install the Drawer Runners: Attach the metal drawer runners to the inside of the side panels using the supplied screws. Use the pre-marked holes—do not drill new ones. The runners should be level and parallel to each other. Slide the drawer into the runners after installation to test movement. If it sticks, loosen the screws slightly and adjust the runner position.
  3. Step 3: Assemble the Drawer Box: Fit the drawer sides to the drawer front using the cam locks, then slide the drawer bottom into the grooves. Attach the drawer back and tighten all screws. Install the drawer front panel if your model has a separate one. Make sure the drawer bottom is fully seated in the grooves before tightening the back panel. A loose bottom can cause the drawer to sag.
  4. Step 4: Attach the Footboard and Mattress Base: Connect the footboard to the side panels using the same cam lock method. Then insert the mattress base slats or panel into the support brackets. Ensure the base sits flat and does not wobble. If the mattress base has slats, space them evenly according to the instruction sheet. Uneven slats can cause the mattress to dip in the middle.
  5. Step 5: Secure the Drawer and Final Tightening: Slide the assembled drawer into the runners and close it. Check that the drawer front aligns flush with the cot frame. If it does not, adjust the runner screws slightly. Once aligned, go back and fully tighten all cam locks and screws. Do not skip the final tightening. Loose connections can make the cot bed unstable over time, especially when the baby starts pulling up to stand.
  6. Step 6: Place the Mattress and Test Stability: Unpack the natural mattress and place it on the base. Press down firmly on all corners to ensure the mattress fits snugly without gaps. Rock the cot bed gently from side to side to confirm it does not wobble. If the cot bed rocks, check that all four legs are on a level floor. Use the included floor protectors or a thin shim under a leg if needed.

Product Facts

  • Mini Cot Bed With Drawer & Natural Mattress - Stone Teal (120x60): The Mokee Mini Cot Bed is crafted in Europe from FSC-certified solid beechwood with no toxic or harmful chemicals. This means the wood is sustainably sourced and safe for your baby to chew on during teething. You can also paint the frame if you want to match your nursery decor.
  • Mini Cot Bed With Drawer & Natural Mattress - White Beech (120x60): This bundle pairs a mini cot bed with a drawer and a natural mattress, giving you a coordinated sleep setup in one purchase. Buying the bundle saves you the hassle of matching a separate mattress and drawer. The white beech finish works well in bright, modern nurseries.
  • Mini Cot Bed With Drawer & Natural Mattress - Walnut (120x60): The low-profile frame fits neatly in nurseries, guest rooms, or apartments while providing a sturdy wooden base and a built-in drawer for essential storage. The walnut finish adds warmth to small spaces, and the integrated drawer keeps sheets and blankets within arm's reach without needing a separate dresser.