Quick Answer
To set up a large condom dispenser, choose a high-traffic, discreet location, mount it securely to a wall at the right height, and stock it with condoms. Follow the steps below for a smooth installation.
Why Placement Matters
Where you place the dispenser affects how often it gets used and how comfortable people feel grabbing a condom. A spot that is visible but offers some privacy—like near restroom exits or in a hallway—tends to work best. Avoid placing it in direct sunlight or near heat sources, as that can shorten condom shelf life.
Mounting Considerations
The large condom dispenser is built with a high-quality polycarbonate material that is sturdy but requires proper wall mounting. Make sure you attach it to a solid wall surface—drywall alone may not hold the weight when fully stocked. Use the included lock and key to prevent tampering.
Step-by-Step Setup Process
- Choose the Right Location: Pick a spot with good foot traffic but enough privacy. Common choices include near restroom exits, in hallways, or next to vending areas. Avoid direct sunlight and heat vents. A location that is too hidden may get ignored; one that is too exposed might make people hesitate.
- Mark and Drill Mounting Holes: Hold the dispenser against the wall at the desired height (typically 48 inches from the floor to the top of the unit). Use a level to ensure it is straight. Mark the mounting holes through the bracket, then drill pilot holes into studs or use wall anchors for drywall. Skipping pilot holes can crack the wall or cause the dispenser to sag over time.
- Secure the Dispenser to the Wall: Attach the dispenser using the provided screws and anchors. Tighten firmly but avoid over-tightening, which could damage the polycarbonate housing. Insert the lock and test that it engages properly. Over-tightening can crack the plastic; under-tightening leaves the unit loose.
- Stock with Condoms: Open the dispenser with the key, load condoms into the chamber (up to 800 units), and arrange them so they dispense easily. Close and lock the unit. Check that condoms are not jammed or folded, which can cause dispensing issues.
- Test and Post Signage: Dispense a test condom to ensure smooth operation. Consider adding a small sign nearby indicating that condoms are available for free or purchase. A test dispense catches mechanical issues before regular use begins.
Product Details
-
Condom Dispenser - Large: Fits approximately 800 condoms and attaches firmly to walls. This capacity means fewer refills, and the secure mount keeps the dispenser stable even in busy venues.
Condom Dispenser - Large
