Quick answer
Mount the Adjustable K9 Aqua Fountain Bracket at the correct height for your dog, secure it to a wall or kennel panel, and connect the L-70 Lixit Water Nibble (sold separately) to create a clean, splash-free watering station.
Why the adjustable bracket matters for your kennel
A fixed-height water bowl can force a large dog to stoop or a small dog to strain upward. The Adjustable K9 Aqua Fountain Bracket gives you 12 inches of height adjustability, so you can set the drinking level at a comfortable height for dogs of different sizes. The built-in drip tray with a drain also prevents water from splashing onto the floor, keeping the kennel area drier and reducing cleanup time.
Because the bracket is made from rugged stainless steel, it holds up well in outdoor or high-traffic kennel environments. The main trade-off is that the L-70 Lixit Water Nibble is not included, so you need to purchase it separately to complete the setup.
Step-by-step installation guide
- 1. Choose the mounting location and height: Pick a spot on a solid wall, kennel panel, or post where the bracket can be securely attached. Measure your dog's shoulder height and set the bracket so the drinking nozzle sits at or slightly below that level. The bracket is 21 inches tall, so leave enough vertical clearance. A common mistake is mounting too high, which forces the dog to reach up and can cause neck discomfort.
- 2. Mark and drill pilot holes: Hold the bracket against the mounting surface and mark the screw holes through the bracket's mounting slots. Use a level to ensure the bracket is plumb. Drill pilot holes with a bit appropriate for your wall material (wood, concrete, or metal). Skipping pilot holes can crack the surface or make it hard to drive screws straight.
- 3. Secure the bracket with suitable hardware: Use corrosion-resistant screws or bolts that match your mounting surface. Tighten them firmly but avoid over-torquing, which could strip the holes or deform the bracket. If mounting to a kennel panel, use the supplied hardware or heavy-duty zip ties as a secondary option. Over-tightening can strip threads or bend the bracket, so stop when the bracket feels solid.
- 4. Attach the L-70 Lixit Water Nibble: Thread the L-70 Lixit Water Nibble into the bracket's mounting hole. Hand-tighten it until it is snug, then give a quarter turn with a wrench if needed. Do not use pipe thread tape unless the nibble instructions specify it. Cross-threading the nibble can damage the threads and cause leaks.
- 5. Connect the water supply and test for leaks: Attach a standard garden hose or plumbing line to the nibble's inlet. Turn on the water slowly and check all connections for drips. If you see a leak, tighten the connection slightly or re-seat the nibble. Adjust the bracket height if needed after testing. A slow leak can waste water and create a mess, so always test before leaving the setup unattended.
- 6. Adjust the drip tray and finalize position: Position the drip tray directly under the nibble so any drips fall into the tray and drain away. Confirm the bracket is still level and the dog can reach the nozzle comfortably. Make small height adjustments as needed using the bracket's adjustable slots. If the tray is misaligned, drips can miss the drain and still wet the floor.
Product facts
-
Adjustable K9 Aqua Fountain Bracket: Rugged stainless steel construction with a drip tray that has a built-in drain to avoid splashing water. The drip tray catches drips and channels them away, so your kennel floor stays dry and you spend less time mopping.
Adjustable K9 Aqua Fountain Bracket
-
Adjustable K9 Aqua Fountain Bracket: 12 inches of height adjustability to fit almost any size dog. You can raise or lower the bracket to match your dog's shoulder height, reducing neck strain and making drinking more comfortable.
-
Adjustable K9 Aqua Fountain Bracket: Designed to work with the L-70 Lixit Water Nibble (not included). The bracket is purpose-built for that specific nibble, so you need to order the L-70 separately for the system to function.
