Quick Answer

To set up your Solo Camera Bundle, first unbox the camera and check the contents, then insert film, power on the camera, and pair it with the scratch-off adventure book. This guide walks you through the entire process.

Before You Start: What’s in the Box

The Solo Camera Bundle includes 30 scratch-off adventures designed for solo dates, plus a signature instant camera. You’ll find the camera body, a USB charging cable (likely micro-USB; check your unit), and the adventure book inside. The film pack is not included and must be purchased separately—make sure you have a compatible 10-pack of Fuji Instax Mini film on hand before starting.

Camera Compatibility and Limitations

This bundle uses a standard instant camera that works only with Fuji Instax Mini film. The camera does not have a rechargeable battery indicator light, so charge it for about 2 hours before first use to avoid a mid-date dead battery. There is no memory card slot—the camera relies entirely on physical film prints.

Step-by-Step Setup Process

  1. Unbox and Inspect Contents: Remove the camera, adventure book, and charging cable from the box. Verify the camera body is undamaged and the scratch-off book hasn’t been tampered with. Common mistake: skip the damage check and later find a battery issue or missing film. Always do a quick visual inspection first.
  2. Charge the Camera Battery: Plug the USB cable into the camera and a USB power source. Let it charge for 2 hours before the first use, even if the camera seems to turn on. Checkpoint: The camera may not have a charging indicator; a full 2-hour charge ensures you don’t run out of power mid-adventure.
  3. Load the Film Pack: Open the film compartment on the back of the camera. Insert a fresh pack of Fuji Instax Mini film with the yellow alignment mark matching the yellow mark inside the camera. Close the compartment door firmly. Common mistake: opening the film compartment after the pack is inserted exposes the film to light and ruins it. Only load film in a dim or shaded area.
  4. Power On and Test Exposure: Press the power button (usually top or side). The lens extends automatically. Point the camera at a neutral subject and press the shutter. Wait about 5 seconds for the print to eject—don’t shake it, just let it develop face-up. Checkpoint: The first print is often a dark cover sheet that ejects automatically—that’s normal. The next one will be your first photo.
  5. Open Your First Scratch-Off Adventure: Flip through the adventure book and pick the first scratch-off page. Use a coin or your fingernail to reveal the activity. Read the instructions and take the camera with you on the solo date. Common mistake: scratching off the whole page at once so you lose the surprise. Scratch only the area you plan to do that night.

What You’re Working With

  • Solo Camera Bundle: 30 Scratch-Off Adventures + Signature Camera designed for solo nights to yourself. This bundle gives you a complete solo date night setup—no need to find a partner, and the scratch-off element adds surprise to each outing.

    Solo Camera Bundle

    Solo Camera Bundle