Quick Answer
To sew the TCB sequin patch on a jacket, position it, pin it, and hand-sew around the border using a whip stitch, working between sequins to keep them intact.
Why Hand-Sewing Beats Iron-On for Sequin Patches
The TCB Sequin Patch is designed as an iron-on patch, but the metallic sequins and black border stitching can be damaged by high heat. Hand-sewing gives you more control and avoids melting or crushing the sequins, especially on delicate jacket fabrics like leather or nylon.
If you do choose to iron, use a pressing cloth and low heat, and never place the iron directly on the sequins. However, for a secure, long-lasting hold that won't damage the patch or your jacket, sewing is the recommended method.
Choosing the Right Thread and Needle
Use a strong polyester thread that matches the black border stitching of the patch. A sharp hand-sewing needle that can pass through the jacket fabric without leaving large holes is essential. For thicker fabrics like denim, a thimble can help push the needle through.
Step-by-Step Sewing Instructions
- Position the patch: Place the TCB Sequin Patch on the jacket where you want it. Use a measuring tape to center it or align it with a seam for a balanced look. Pin it in place with safety pins or sewing pins, making sure the patch lies flat. Check the placement in a mirror before pinning; once pinned, adjust if it looks crooked.
- Thread your needle: Cut about 18 inches of thread and thread the needle. Double the thread and tie a knot at the end. Use a thread that matches the black border stitching for a nearly invisible result. A shorter thread prevents tangling and makes the sewing process smoother.
- Start sewing from the inside: Insert the needle from the inside of the jacket so the knot is hidden. Bring the needle up through the fabric and the edge of the patch, then push it back down through the patch and fabric close to where you started. Keep the stitches small and close together; this prevents the patch from peeling over time.
- Whip stitch around the border: Continue making small diagonal stitches over the edge of the patch, working your way around the entire border. Sew between the sequins rather than through them to avoid cracking or bending them. Pause every few stitches to smooth the patch flat and ensure it hasn't shifted.
- Secure and finish: When you reach the starting point, make a few small stitches in place to secure the thread, then push the needle to the inside and tie a knot. Trim the excess thread. Double-check that all edges are securely attached and there are no loose threads.
Product Facts
-
TCB Sequin Patch: The TCB Sequin Patch features Elvis' famous TCB logo covered in metallic gold sequins accented by black border stitching. The sequins are delicate, so sewing between them rather than through them keeps the patch looking shiny and intact.
TCB Sequin Patch
