Quick answer
To sterilise baby bottles with UV light, place clean, dry bottles inside the UV steriliser, close the lid, and run the cycle. The Advanced Pro UV Steriliser & Dryer destroys 99.99% of bacteria, viruses, and mould in just 5 minutes, then dries bottles with HEPA-filtered air.
Why UV sterilising beats boiling or steaming
UV sterilisation uses ultraviolet light to destroy microorganisms without heat, so it's safe for plastics that might warp in boiling water or steam. It's also faster than traditional methods, with some models like the Advanced Pro UV Steriliser & Dryer completing the cycle in about 22 minutes.
One trade-off: UV light only treats surfaces it reaches. Bottles with narrow necks or complex parts may need to be positioned carefully so the light can reach all surfaces. Check the manufacturer's guidance for your specific model.
Step-by-step: Using a UV steriliser for baby bottles
- Clean bottles before UV sterilising: Rinse and scrub each bottle, teat, and ring with warm soapy water to remove milk residue. UV light kills germs but does not remove dirt, so pre-cleaning is essential. Check that no milk film remains inside the bottle; trapped residue can shield bacteria from UV light.
- Arrange items properly: Place bottles, teats, and other accessories in the UV chamber with openings facing the UV light. Avoid stacking items too closely, as UV needs direct exposure to reach all surfaces. Leave space between items so every surface gets exposed.
- Close the lid and start the cycle: Secure the lid or door completely, then select the UV sterilise cycle. The advanced pro UV steriliser & dryer destroys 99.99% of bacteria, viruses and mould in about 5 minutes using UV LEDs. Check that the lid is fully closed; the cycle won't start otherwise.
- Wait for the full cycle: Let the UV cycle finish completely. Do not open the lid mid-cycle, as this interrupts the sterilisation and exposes you to UV light. If you open it early, run the cycle again from the start.
- Dry and store: After sterilisation, use the HEPA filtered drying function if available, or air-dry on a clean rack. Store bottles in the closed steriliser to keep them sterile for up to 3 days. Keep the lid closed until you need the bottle to maintain the sterile environment.
UV steriliser options
-
advanced pro UV steriliser & dryer, 3rd gen: The Advanced Pro UV Steriliser & Dryer, 3rd Gen safely destroys 99.99% of bacteria, viruses and mould in just 5 minutes using UV LEDs, and dries with HEPA filtered air in 17 minutes. This means you can sterilise and dry bottles quickly, with filtered air that helps keep them clean until the next feed.
advanced pro UV steriliser & dryer, 3rd gen
