Quick Answer
Attach the clip to your visor's rigid edge, slide your sunglasses in with the lenses facing up, and adjust the grip so they stay secure but easy to pull out.
Why a Visor Clip Beats the Glovebox
A car visor sunglass clip keeps your shades at eye level, so you never fumble through the glovebox or center console while driving. It also protects lenses from scratches caused by loose coins or keys. The tradeoff: if you park in direct sun, the visor can get hot, so you may want to remove your sunglasses when leaving the car for long periods.
Choosing the Right Spot on the Visor
Placement matters more than you might think. The clip should sit where the visor is thickest and most rigid—usually near the center or the edge opposite the mirror. Avoid the mirror area; the clip can block your view or interfere with the mirror's movement. Also, keep the clip clear of the visor's pivot point so it doesn't catch when you flip the visor.
Steps to Install and Use a Car Visor Sunglass Clip
- Clean the visor surface: Wipe the visor area where the clip will attach with a microfiber cloth to remove dust and oils. This helps the clip grip firmly and prevents scratches on the visor material. Check that the clip's padding or grip does not leave marks on the visor before you commit.
- Position the clip on the visor: Slide the clip over the edge of the visor, usually on the side facing the windshield. Adjust the position so the sunglasses rest flat against the visor and do not block your view when the visor is flipped down. Test the clip at both the flipped-up and flipped-down positions before driving.
- Secure the clip: Press the clip firmly onto the visor until it grips. If your clip has a tension screw, tighten it just enough to hold without cracking the visor. Avoid over-tightening. Check the grip by gently tugging the clip; it should not slide when you pull the visor.
- Insert and adjust sunglasses: Slide the temple arm of your sunglasses into the clip, then adjust the angle so the lenses sit flat against the visor and don't obstruct your view when the visor is flipped down. Position the clip so the sunglasses don't block your line of sight when the visor is lowered.
- Test access while driving: Practice grabbing and returning the sunglasses while seated. The clip should hold them firmly but release with one hand. If it feels too tight, reposition the clip or adjust the tension gently. If the clip scratches the lens or slips off the visor, reposition it or add a thin padding layer.
Product Fact
-
Car Visor Sunglass Clip: The Car Visor Sunglass Clip from Eagle Eyes Optics is an accessory designed to hold sunglasses on a car visor. It keeps your sunglasses within arm's reach and prevents scratches by avoiding loose storage in a glovebox or console.
Car Visor Sunglass Clip
