Quick Answer
To get the most milk from your Cimilre S6+, start with a comfortable suction level, use the stimulation mode first, then switch to expression mode, and always ensure your flange fits correctly.
Why the Right Settings Matter for Output
The Cimilre S6+ uses GentleFlow Technology™, which mimics a baby's natural sucking rhythm. Using the wrong suction level or skipping the stimulation phase can reduce your letdown and overall output, even with a high-quality pump.
Flange Fit: The Most Overlooked Factor
A poor flange fit is the #1 reason for low output and discomfort. Your nipple should move freely in the tunnel without rubbing the sides. If you feel pain or see friction, you may need a different flange size—even with the S6+'s adjustable suction.
Step-by-Step Guide to Efficient Pumping
- 1. Prepare Your Parts and Position: Wash your hands and assemble the pump parts. Ensure the backflow protector is correctly placed. Sit upright with good posture and hold the flanges against your breasts without leaning forward. A common mistake is assembling the backflow protector backward—check the arrows on the silicone piece.
- 2. Start with Stimulation Mode: Press the power button and select the stimulation mode (usually the first setting). Use the lowest suction level that feels like a gentle tickle. Stay in this mode for 2–3 minutes or until you see milk droplets forming. Skipping stimulation mode can delay letdown and reduce total output.
- 3. Switch to Expression Mode and Adjust Suction: Once milk flows steadily, press the mode button to switch to expression mode. Gradually increase the suction level until it feels strong but not painful—typically level 5–8 on the S6+. Pump for 10–15 minutes per side. Pumping at too high a suction can actually decrease output by causing nipple compression and pain.
- 4. Use the Rechargeable Feature for Freedom: The S6+ is rechargeable, so you can pump anywhere without being tethered to a wall outlet. Charge it fully before your first use (about 3 hours) and keep it charged for consistent suction power. A low battery can reduce suction strength—charge after every 2–3 sessions to maintain peak performance.
- 5. End with a Few Minutes of Stimulation: If you feel another letdown coming, switch back to stimulation mode for 1–2 minutes. This can help empty the breast more completely and increase overall output. Many moms stop too early—using stimulation again can trigger a second letdown for extra ounces.
Product Facts
-
Cimilre - S6+ Adjustable Rechargeable Breast Pump: The S6+ features GentleFlow Technology™ with a unique motor and precise suction control for a smooth, quiet pumping experience. This technology helps trigger more efficient letdowns, which can lead to higher milk output in less time.
Cimilre - S6+ Adjustable Rechargeable Breast Pump
