Quick Answer
The Craftool Burnishing Machine Accessory Pack includes five interchangeable heads for polishing, sanding, and burnishing leather edges. This guide walks you through setup, head changes, and technique so you get smooth, professional results every time.
What’s in the Pack and Why It Matters
The accessory pack includes a Rosewood Polishing Head, Sandpaper Burnishing Head, Wool Polishing Head, Metal Burnishing Head, and a Power Cord. Each head serves a specific purpose in the edge-finishing process, from initial sanding to final polish. Using the correct head in the right order saves time and avoids damaging your leather.
Compatibility Note
This accessory pack is designed exclusively for the Craftool Burnishing Machine. It is not compatible with previous models. Before purchasing, confirm that you own the current Craftool Burnishing Machine to ensure a proper fit and safe operation.
Step-by-Step: Using the Craftool Burnishing Machine Accessory Pack
- 1. Attach the Power Cord and Secure the Machine: Plug the included power cord into the burnishing machine and a grounded outlet. Place the machine on a stable, non-slip surface. Ensure the chuck is clean and free of debris before inserting any head. A loose connection can cause the machine to vibrate or stop mid-use. Always check that the cord is fully inserted.
- 2. Install the Sandpaper Burnishing Head for Initial Shaping: Insert the Sandpaper Burnishing Head into the chuck and tighten it securely. Turn on the machine and lightly run the sanding head along the leather edge at a low angle. Use even pressure to remove rough fibers and shape the edge. Too much pressure or a high angle can gouge the leather. Let the abrasive do the work.
- 3. Switch to the Rosewood Polishing Head for Burnishing: Remove the sanding head and insert the Rosewood Polishing Head. Apply a small amount of water or gum tragacanth to the leather edge. Run the spinning head along the edge with moderate speed, moving back and forth until the edge darkens and becomes smooth. Skipping the moisture step reduces burnishing effectiveness. Keep the edge damp but not soaked.
- 4. Use the Wool Polishing Head for Final Luster: Replace the rosewood head with the Wool Polishing Head. Apply a leather burnishing cream or wax to the edge. Buff the edge with the wool head at medium speed until it shines. Wipe away any excess compound with a clean cloth. Using too much compound can clog the wool fibers. A thin, even coat works best.
- 5. Clean and Store the Heads After Each Use: Unplug the machine before removing any head. Wipe each head with a dry cloth to remove dust and residue. Store the heads in the accessory pack case or a dry area away from moisture. Leaving residue on the heads can transfer grit to your next project and reduce performance.
Product Facts
-
Craftool® Burnishing Machine Accessory Pack: Includes Rosewood Polishing Head, Sandpaper Burnishing Head, Wool Polishing Head, Metal Burnishing Head, and Power Cord. You get five specialized heads in one kit, so you can sand, burnish, and polish leather edges without buying separate tools.
Craftool® Burnishing Machine Accessory Pack
