Quick answer
Load dirty bottles and parts into the EaseClean Pro, select the appropriate cycle, and let the machine wash, sterilize, and dry them automatically. Follow the steps below for best results and to avoid common mistakes.
Why choose a 4-in-1 bottle washer over hand scrubbing
Hand scrubbing baby bottles is time-consuming and can leave residue or bacteria if not done thoroughly. The EaseClean Pro automates washing, sterilizing, drying, and storing in one cycle, saving you effort and ensuring consistent cleanliness. It's especially helpful for busy parents or those with multiple bottles to clean daily.
Step-by-step instructions for using the EaseClean Pro
- Step 1: Prepare and load items: Rinse off any large milk or food residue from bottles, nipples, and pump parts. Place them upside down in the designated racks, ensuring they are not overcrowded. Close the lid securely. Overloading can block water jets and reduce cleaning effectiveness.
- Step 2: Add detergent and select cycle: Pour the recommended amount of baby-safe detergent into the dispenser (check your detergent's instructions). Choose the cycle that matches your load: quick wash, full clean, or sterilize-only. Press start. Using too much detergent can leave residue; too little may not clean properly.
- Step 3: Unload and store: Once the cycle finishes, wait for the cool-down period before opening. Remove items with clean hands. Store bottles in the built-in storage compartment or assemble and use immediately. Always unload promptly to prevent moisture buildup inside the machine.
Product facts
-
EaseClean Pro Bottle Washer and Sterilizer: Wash, Dry & Store: This 4-in-1 bottle washer system automatically washes, sterilizes, dries, and stores bottles, pump parts, pacifiers, sippy cups, and other baby essentials from dirty to ready-to-use in one go. You don't need separate devices or manual drying—just load, run, and use when needed.
EaseClean Pro Bottle Washer and Sterilizer: Wash, Dry & Store
