Quick Answer

Attach the K-9II connector to your forced air dryer's hose, then snap the flat nozzle onto the connector for a secure fit that directs air evenly across the coat.

Why the Flat Nozzle Design Matters

The flat nozzle spreads air over a wider area compared to round nozzles, which reduces the risk of blowing fur into tangles or irritating sensitive skin. It is especially useful for breeds with double coats or fine fur that mats easily under concentrated airflow.

Step-by-Step Guide to Attaching and Using the Flat Nozzle

  1. 1. Prepare the Dryer Hose: Ensure your forced air dryer is turned off and unplugged. Slide the K-9II connector onto the end of the dryer hose, pushing it until it fits snugly. A loose connector can pop off during use; give it a gentle tug to confirm it is secure.
  2. 2. Attach the Flat Nozzle: Align the base of the Electric Cleaner K-9 flat nozzle with the K-9II connector and press firmly until you hear or feel it click into place. If the nozzle does not click, rotate it slightly and try again—forcing it can damage the connector.
  3. 3. Test the Airflow: Turn on the dryer at a low setting first. Hold the nozzle a few inches from your hand to check that air flows evenly across the flat opening. Uneven airflow may indicate a partial blockage or a misaligned connection; reattach the nozzle if needed.
  4. 4. Dry the Coat in Sections: Work from the back of the pet forward, using the flat nozzle parallel to the coat direction. Keep the nozzle moving to avoid concentrating heat on one spot. Static buildup is normal with forced air; wipe the nozzle tip occasionally with a dryer sheet to reduce it.
  5. 5. Disconnect and Clean: Turn off the dryer, unplug it, then pull the nozzle off the connector. Remove the connector from the hose and rinse both parts with warm water to remove hair and debris. Let all parts air-dry completely before storing to prevent mold or odors inside the nozzle.

Product Facts

  • Electric Cleaner K-9 Flat Nozzle and Connector K-9II: The Electric Cleaner K-9 flat nozzle design ensures fast drying without damaging fur or skin, and the K-9II connector attaches it to the K-9 forced air dryer. You get a secure, fuss-free connection that speeds up drying time while protecting the coat from heat or air pressure damage.

    Electric Cleaner K-9 Flat Nozzle and Connector K-9II

    Electric Cleaner K-9 Flat Nozzle and Connector K-9II