Quick answer
Attach the M+ Stroller Rain Cover by securing the elastic hem around the M+ seat canopy and foot area, then zip the front panel closed. A proper fit keeps your child dry without blocking airflow or creating fog.
Why a custom-fit rain cover matters
A generic plastic sheet can trap heat, limit visibility, and flap loose in the wind. The M+ Stroller Rain Cover is tailored to the Orbit Baby M+ seat geometry, so it stays put and leaves the ventilation panels uncovered. That means your child stays dry without overheating or feeling stuffy.
The cover also has a clear front panel that lets you see your child clearly. If you are using a universal cover, you often lose that visibility or have to cut holes for the canopy struts.
How to install the M+ Stroller Rain Cover
- 1. Unfold and orient the cover: Lay the rain cover flat and identify the clear front panel (faces your child) and the elastic hem (fits around the canopy). Hold it so the zipper runs vertically along the side. Common mistake: Installing the cover backwards. The clear panel must face the child, not the sky.
- 2. Secure the elastic hem over the canopy: Stretch the elastic edge over the top of the M+ seat canopy. Pull it down evenly so the fabric sits flush against the canopy shape. The elastic should grip the canopy rim without bunching. Check that the canopy is fully open before attaching the cover. A partially closed canopy creates slack that lets rain pool on top.
- 3. Tuck the bottom hem around the foot area: Pull the lower elastic edge under the seat footrest and around the sides. Make sure the cover extends past the footrest so rain drips off, not into the seat. If the hem is too loose, the cover may lift in a gust. Re-seat it so the elastic is snug against the stroller frame.
- 4. Zip the side panel closed: Starting at the top near the canopy, zip the side zipper downward. Ensure the zipper track is fully engaged and the cover lies flat without wrinkles that could channel water. A partially zipped cover leaves a gap for wind and rain. Run your finger along the zipper to confirm it's closed end-to-end.
- 5. Adjust for ventilation and visibility: The M+ Rain Cover has built-in ventilation panels on the sides. Make sure these are not blocked by the canopy fabric or a stroller organizer. Wipe the clear panel with a dry cloth if condensation appears. Condensation is normal on humid days. Leave a small gap at the top zipper end for extra airflow if needed.
Product facts
-
M+ Stroller Rain Cover: Custom fit for the Orbit Baby M+ stroller seat for secure, full coverage protection. A tailored fit means the cover won't shift or blow off, and you can still access the stroller's storage basket without removing the cover.
M+ Stroller Rain Cover
