Quick Answer

The Mr. HOBBY Almighty Clip Stick holds small parts securely with its metal clip so you can paint or model without touching wet surfaces. Use the wooden handle to reduce fatigue and speed up your workflow.

Why a Dedicated Clip Stick Beats Improvised Holders

Using a dedicated clip stick like the Mr. HOBBY Almighty Clip Stick gives you a stable grip and keeps your fingers away from wet paint. The metallic clip at the end holds parts firmly, while the wooden handle stays comfortable during long sessions.

Improvised holders like toothpicks or tweezers often slip or leave marks. A proper clip stick lets you rotate the part easily and reduces the risk of dropping it mid-paint.

Step-by-Step Guide

  1. Attach the part to the clip: Gently squeeze the metallic clip open and slide the part into the jaws. Release slowly so the clip holds the part without cracking or bending it. Common mistake: clamping too hard can damage delicate plastic or resin parts. Use light pressure for fragile pieces.
  2. Adjust the angle for painting: Rotate the clip stick so the part is at a comfortable angle. The wooden handle gives you a stable grip, and you can tilt or turn the part without touching it. Checkpoint: make sure the clip does not cover the area you need to paint. Reposition the part if necessary.
  3. Paint the exposed area: Apply paint to the exposed surfaces. Because the clip holds the part securely, you can use both hands to steady the brush or airbrush. Common mistake: painting too close to the clip can leave a bare spot. Rotate the part or reposition the clip to cover all sides.
  4. Let the part dry while still clipped: Leave the part on the clip stick until the paint is dry to the touch. The clip keeps the part elevated, preventing smudges or dust from settling on wet paint. Checkpoint: do not rush drying. Touching the paint too early can ruin the finish.
  5. Remove the part carefully: Once the paint is fully cured, gently squeeze the clip to release the part. If the clip leaves a small mark, touch it up with a brush. Common mistake: twisting the part off the clip can scratch the paint. Always open the clip fully before removing the part.

Product Facts

  • Mr. HOBBY Mr. Almighty Clip Stick (36 pcs) (GT90): The end of the hand is a metallic clip so parts are properly supported by painting or modeling. You can hold small parts securely without worrying about them slipping or leaving fingerprints on fresh paint.

    Mr. HOBBY Mr. Almighty Clip Stick (36 pcs) (GT90)

    Mr. HOBBY Mr. Almighty Clip Stick (36 pcs) (GT90)

  • Mr. HOBBY Mr. Almighty Clip Stick (36 pcs) (GT90): The handle is wood so depending on the task, time will be cut shorter! The lightweight wooden handle reduces hand fatigue, letting you paint longer without needing a break.