Quick Answer
Wear UV safety glasses every time you use the UVLash System to prevent accidental eye exposure to UV light during curing.
Why Eye Protection Matters with UV Lash Curing
UV lash glue cures in 1-2 seconds under a UV lamp, which is fast and convenient. However, the same UV light that cures the adhesive can harm your eyes if it shines directly into them. Unlike traditional lash adhesives that cure by air drying, UV curing involves a light source that demands proper eye protection for the technician and the client.
Choosing the Right Glasses for the Job
Not all safety glasses block UV light effectively. The UV Safety Glasses from the UVLash System are designed with UV-thickened lenses and high transparency for clear vision while protecting your eyes. They are lightweight and have a curved nose bridge for comfort during extended wear. Using regular glasses or non-UV-rated eyewear may not provide adequate protection.
Step-by-Step: Using UV Safety Glasses with the UVLash System
- Put on the UV Safety Glasses Before Turning On the Lamp: Place the glasses over your eyes and adjust the curved nose bridge so they sit comfortably and securely. Ensure the lenses cover your entire field of vision without gaps. Common mistake: putting on glasses after the lamp is already on. Always put them on first.
- Position the UV Lamp at the Correct Distance: Hold or mount the UV lamp 6-8 inches from the lashes as recommended by the UVLash System instructions. Angle the lamp so the light is directed at the lashes, not toward your eyes or the client's eyes. Checkpoint: if you can see the lamp's light directly in your peripheral vision, adjust the angle.
- Cure Each Lash Section While Keeping Glasses On: After applying the UV glue and placing the lash, activate the lamp for 1-2 seconds. Keep your eyes closed or looking slightly away from the lamp even with glasses on. Do not remove the glasses until the session is complete. Common mistake: removing glasses between sections. UV exposure can accumulate over a session.
- Clean and Store the Glasses After Each Use: Wipe the lenses with a soft, lint-free cloth to remove any adhesive residue or dust. Store them in a clean case away from direct sunlight to prevent lens degradation. Checkpoint: scratched or cloudy lenses reduce visibility and protection. Replace if damaged.
Product Facts
-
UV Safety Glasses: UV Thickened Lens UV Resistant High Transparency Ultra Clear Vision Lightweight with a curved nose bridge design. These glasses block UV light while keeping your vision clear, so you can see fine lash details without eye strain.
UV Safety Glasses
-
UVLash Full Kit & Course with Kit: Unlike traditional lash adhesive the new UV Glue cures with an UV light instead of oxygen (air drying). Because the glue cures instantly with UV light, you must protect your eyes from that light every time you cure a lash.
UVLash Full Kit & Course with Kit
