Quick answer
Keep the Barista Towels Pack with your machine and use one cloth dry for wiping the basket and one slightly damp for the body; then fit the Octaroma drinking lid only after the cup rim is dry. This two-cloth habit prevents grit from spreading and stops the lid from slipping during travel.
drinking lid
Why two small accessories change your daily cleanup
A portable espresso routine fails in the small moments: a wet basket, a gritty portafilter, a lid that will not seal because the rim is slick. The Barista Towels Pack gives you a dedicated cloth that is sized for those moments, and an Octaroma drinking lid turns your cup into a closed vessel instead of an open one. Neither replaces a full wash, but together they reduce the mess you carry between stops.
What the Barista Towels Pack actually is
The cloths are 280 x 280 mm (11 x 11 in) and made of 85% polyester and 15% nylon, so they can be used dry or slightly damp. That size is large enough to wrap around a machine body or lay flat as a preparation pad, and the material absorbs coffee or water spillage. Because the pack contains multiple cloths, you can assign one to dry wiping and one to damp wiping without mixing the two jobs.
What the Octaroma drinking lid is for
An Octaroma drinking lid is a lid for the Octaroma cup, not for the espresso machine itself. Its job is to keep a drink contained while you move, which matters when you brew into the cup and then walk to a seat, a train platform, or a trail. Fit matters: the lid sits on the cup rim, so any coffee or grit left on that rim will interfere with a clean seat. Wipe the rim dry before you press the lid on.
Your five-step cleanup and lid routine
- 1. Lay out one dry towel before you brew: Unfold a Barista Towels Pack cloth and place it flat as a preparation pad under the machine. Keep a second cloth folded nearby for the damp step. Checkpoint: if the cloth is already damp, swap it for a dry one so it can absorb spills instead of smearing them.
- 2. Knock out the puck and wipe the basket dry: After brewing, remove the basket and use the dry cloth to wipe the inside and the threads. A dry wipe removes grounds; a wet wipe turns them into paste. Mistake to avoid: wiping the basket with the same cloth you used on the body, which transfers oils back into the basket.
- 3. Use the second cloth slightly damp on the body: Dampen a corner of the second cloth, wipe the machine body and the area around the water tank, then dry it with the clean side. Checkpoint: the body should feel dry, not tacky, before you reassemble the machine.
- 4. Dry the Octaroma cup rim before fitting the lid: Wipe the rim of the Octaroma cup with the dry cloth, then press the Octaroma drinking lid into place. A dry rim gives the lid a clean surface to sit on. Mistake to avoid: fitting the lid over a wet or gritty rim, which can let liquid seep out when the cup tips.
- 5. Fold and store the cloths with the machine: Fold the dry cloth and tuck it into the protective case or beside the machine. Let a damp cloth air-dry completely before packing it away. Checkpoint: never store a damp cloth against the machine; trapped moisture is the fastest way to a musty smell.
Product facts
- BARISTA TOWELS PACK: Barista Towels Pack cloths are 280 x 280 mm (11 x 11 in), made of 85% polyester and 15% nylon, and can be used dry or slightly damp. The size covers a machine body or works as a preparation pad, and the dry-or-damp choice lets you separate wiping tasks without buying two products.
- NANOPRESSO JOURNEY FALL BREAK: Nanopresso Journey Fall Break is a special edition illustrated by French designer/artist SteF and is packed with a protective case. If you carry a Nanopresso in the included case, you already have a place to store a folded towel so cleanup gear travels with the machine.
