Quick answer

Set up your Ingenuity 3DSuite DualDock Carry Cot Stand by unfolding the legs until they lock, attaching the storage basket, and then placing the carry cot on top. The whole process takes about 5 minutes with no tools required.

Before You Start: What You Need

The Ingenuity 3DSuite DualDock Carry Cot Stand is designed to pair with the 3DSuite DualDock Carry Cot (sold separately). You'll need the stand itself, the carry cot, and a flat, level surface free of clutter. No tools are required for assembly, but having a soft rug or blanket underneath can protect the floor and prevent the stand from sliding during setup.

Common Mistakes to Avoid

The most frequent error is not fully locking the legs into place before attaching the carry cot. If the legs aren't locked, the stand may collapse under weight. Another mistake is placing the carry cot on the stand without ensuring the support bars are aligned with the cot's slots, which can lead to instability. Always double-check each lock before use.

Step-by-Step Setup Instructions

  1. Unfold the Stand Legs: Place the stand on a flat surface. Pull each leg outward until you hear a click, indicating the leg is locked into position. Repeat for all four legs. If you don't hear a click, the leg isn't locked. Push it back and try again until it clicks.
  2. Attach the Storage Basket: Locate the hooks on the storage basket and snap them onto the metal frame of the stand. Ensure all hooks are securely engaged and the basket hangs level. An uneven basket can shift weight. Check that all four hooks are attached before placing any items inside.
  3. Position the Carry Cot on the Stand: Align the carry cot's support bars with the slots on top of the stand. Lower the cot gently until it sits flush. Verify that the cot does not wobble and that the stand's locking tabs are visible and engaged. If the cot rocks or doesn't sit flat, the bars may not be fully seated. Lift and reposition before use.
  4. Test Stability Before Use: Press down firmly on the center of the carry cot to check for any movement. Shake the stand gently side to side. If it feels stable, the setup is complete. If not, recheck all leg locks and the cot's seating. Never use the stand if it feels unstable. Disassemble and repeat the steps from the beginning.

Product Details