Quick answer

Installing Jade AIR Skates Universal Donuts takes about 10 minutes. Clean the old adhesive, align the donuts, and press firmly for a secure fit.

Why choose Universal Donuts over full-size skates

Universal Donuts are small circular PTFE skates that work with almost any mouse shape. They are easier to align than full-size skates and produce less noise thanks to the microporous polyurethane foam layer. The trade-off is slightly less surface area, which can feel different on cloth vs. plastic mouse pads.

What you need before starting

You will need the Jade AIR Skates Universal Donuts, a clean microfiber cloth, isopropyl alcohol (70% or higher), a plastic spudger or guitar pick, and a well-lit workspace. Avoid using metal tools that could scratch your mouse.

Installation steps

  1. Remove old skates: Heat the old skates gently with a hairdryer for 10-15 seconds to soften the adhesive. Use a plastic spudger to lift an edge and peel the skate off. Avoid pulling too fast to prevent tearing. Checkpoint: If adhesive residue remains, apply a drop of isopropyl alcohol and rub gently with a cloth.
  2. Clean the skate recess: Dampen a microfiber cloth with isopropyl alcohol and wipe the recess thoroughly. Remove all dust, oil, and leftover glue. Let it air dry for 2 minutes. Common mistake: Skipping this step causes poor adhesion and the donuts may lift during use.
  3. Peel and align the donuts: Peel one donut from the backing sheet. Hold it by the edge with tweezers to avoid fingerprints. Position it in the center of the recess, then press down lightly. Repeat for each recess. Checkpoint: Place the donut exactly where you want it before pressing firmly; repositioning is difficult once the adhesive touches.
  4. Press and set the adhesive: Press each donut firmly for 10-15 seconds using your thumb or a soft cloth. Apply even pressure across the entire surface. This activates the adhesive and ensures a flat profile. Common mistake: Insufficient pressing leads to air bubbles or the donut peeling off after a few days.
  5. Break in the skates: Use the mouse on your mouse pad for 2-3 hours of normal gaming or browsing. The PTFE will settle and the microporous foam layer will compress slightly for optimal glide. Checkpoint: If you notice scratchiness after break-in, check for debris under the donuts or uneven application.

Product facts

  • Jade AIR Skates - Universal Donuts (Green): Jade Air Universal Donuts are made of pure PTFE with one-piece molding, offering a smooth and flat surface. This ensures consistent glide and precise fit on most gaming mice, reducing the chance of uneven wear.

    Jade AIR Skates - Universal Donuts (Green)

    Jade AIR Skates - Universal Donuts (Green)