Quick answer
LegCoat Wraps 111 are soft neoprene pads that wrap around the upper leg of your tripod and close with Velcro. Fit them by cleaning each leg, positioning the wrap so the backing grips the leg, and pressing the closure firmly. For full-length camouflage and shoulder padding, choose LegCoat 5530S instead.
What LegCoat Wraps 111 actually do
LegCoat Wraps 111 are a set of three soft neoprene wraps that attach to the upper leg of your tripod with a Velcro closure. The backing is designed to grip the leg so the wrap does not slide, and the spongy neoprene acts as a thermal barrier and a cushion when you carry the tripod. They are a practical upgrade if your tripod legs get uncomfortably hot or cold, or if you want a softer grip when moving between positions. The set covers three legs, so one purchase is enough for a standard tripod.
When to choose LegCoat 5530S instead
LegCoat 5530S uses closed-cell foam padding and heavy-duty neoprene. It is designed to protect your shoulder when carrying gear and to break up the shape of the tripod with camouflage. If your main goal is shoulder comfort on long carries or reducing the tripod's visual signature, the 5530S is the better fit. If you want a compact wrap that adds grip and thermal comfort to the upper legs, the Wraps 111 set is the simpler choice. Both are sold as sets and both use Velcro, but they serve different carrying habits.
How to fit LegCoat Wraps 111
- Clean and dry each tripod leg: Wipe down the upper section of each leg with a damp cloth and let it dry completely before attaching anything. Dust, grit, or oil will weaken the grip of the backing and the Velcro. Checkpoint: the leg should feel smooth and dry, not tacky or gritty.
- Position the wrap on the upper leg: Place the neoprene wrap around the upper leg where your hands or shoulder usually contact the tripod. Keep it below any leg locks or moving parts so it does not interfere with extension. Common mistake: wrapping too high and blocking a leg lock or clamp.
- Press the backing against the leg: The backing is designed to tightly grip the tripod leg so the wrap will not slide. Press the neoprene against the leg as you align the edges, working from the center outward. Checkpoint: the wrap should feel stuck to the leg before you close the Velcro.
- Close the Velcro firmly: Pull the Velcro closure tight and press it down along its full length. A partial closure can catch on gear or peel open when you carry the tripod. Common mistake: leaving a loose edge that snags in your bag.
- Test the grip and repeat on the other legs: Grab the wrapped section and twist gently. If it shifts, reopen the Velcro, reposition, and press the backing down again. Repeat the same steps on the remaining two legs. Checkpoint: no sliding when you twist or lift the tripod by the wrapped section.
Product facts
- LegCoat® Wraps 111 (set of 3): LegCoat Wraps 111 are made from soft neoprene and wrap around the upper leg of your tripod with a Velcro closure. The Velcro closure lets you add or remove the wraps without disassembling the tripod, so you can adjust coverage as conditions change.
- LegCoat® 5530S: LegCoat 5530S is made of closed-cell foam padding and heavy-duty neoprene, with camouflage to break up the tripod's shape and padding to protect your shoulder when carrying. If you carry your tripod over your shoulder for long distances or want camouflage, the 5530S addresses those needs in one product.
- LensCoat® Canon 300 NO IS f/4: LensCoat for the Canon 300 f/4 NO IS offers protection from scrapes and bumps and helps break up the shape of the lens, with clear plastic windows over the auto focus and distance scale. If you are already wrapping your tripod legs for protection and concealment, covering the lens with the same logic keeps your whole support system consistent.
