What the Link Phono Interconnect is for
The Link Phono Interconnect is a pair of cables designed to carry the low-level signal from a turntable to a phono stage. Transparent positions it as an addition to an Upgraded Basic music system with a good phonograph setup, and notes that it works well with other ENGAGING Transparent System Companions to deliver cleaner, clearer, more dynamic sound.
This guide covers the practical side of installation: choosing a length, routing the cable, and making the connection between tonearm and phono stage. It also flags where the supplied product information stops short, so you can make an informed decision rather than assume features that are not confirmed.
Link Phono Interconnect at a glance
-
Link Phono Interconnect: LINK Phono Interconnects are a great addition to any Upgraded Basic music system with a good phonograph set-up. Confirms the intended system context so you can judge whether this cable matches your setup.
Link Phono Interconnect
-
Link Phono Interconnect: They work well with other ENGAGING Transparent System Companions to provide cleaner clearer, more dynamic sound for a closer connection to music. Useful if you already own or plan to add other Transparent components and want a coherent cable loom.
-
Link Phono Interconnect: Available in 1 meter, 1.5 meter, 2 meter, and 10 feet (pair) lengths. Length is the main variable you control at purchase; picking the right one avoids excess cable or a stretch that strains the tonearm.
How to connect the Link Phono Interconnect
The steps below describe the physical connection between tonearm and phono stage. They do not cover internal tonearm wiring, grounding schemes, or phono stage settings, because the supplied product record does not include those instructions.
- Measure the run before you order: Measure from the tonearm output or turntable output panel to the phono stage input. Add a little slack for routing, but avoid coils of excess cable. The Link Phono Interconnect comes in 1 m, 1.5 m, 2 m, and 10 ft pairs, so choose the shortest length that reaches comfortably.
- Power down before connecting: Turn off the turntable and phono stage before making connections. This is standard practice for low-level audio connections and avoids loud transients through your speakers.
- Connect the tonearm end: Plug the Link Phono Interconnect into the tonearm output or the turntable's output jacks. The supplied information does not specify connector type (RCA or other), so check the connectors on your turntable and on the cable before ordering.
- Connect the phono stage end: Plug the other end into the phono input on your phono stage. Do not connect it to a line-level auxiliary input unless that input is specifically designed for a turntable, as the signal level and equalization will be wrong.
- Route the cable away from power cords: Keep the phono interconnect separated from AC power cables where possible. Phono signals are very low level, and this simple routing habit reduces the chance of hum. The supplied record does not include shielding specifications, so treat this as general good practice rather than a product claim.
- Check for hum and channel balance: With the system powered on but the volume low, listen for hum or uneven channels. If hum appears, recheck the seating of both connectors and the routing. The supplied information does not describe a ground wire or grounding terminal on this cable, so consult your turntable and phono stage manuals for grounding.
Choosing between the four lengths
Length is the only option listed for this product. A 1 meter pair suits a compact setup where the turntable sits close to the phono stage. The 1.5 meter and 2 meter pairs give more flexibility for wider racks or side-by-side placement. The 10 feet pair is best for installations where the phono stage is in a separate cabinet or across the room.
Longer cables are not automatically better or worse; the right choice is the one that reaches without tension and without leaving a large excess coiled near sensitive components. If your measurement falls between two lengths, take the longer one only if routing demands it.
What the supplied information confirms and what it does not
The product record gives a clear system context and a set of lengths, but it is not a full datasheet. The table below separates what is stated from what is simply not addressed, so you know which questions to ask before buying.
- Confirmed: intended system: Transparent describes the Link Phono Interconnect as an addition to an Upgraded Basic music system with a good phonograph setup.
- Confirmed: companion products: It is stated to work well with other ENGAGING Transparent System Companions.
- Confirmed: lengths: 1 meter, 1.5 meter, 2 meter, and 10 feet, all sold as pairs.
- Not confirmed: connector type: The record does not state whether the cable is terminated with RCA plugs, a DIN plug, or another connector. Verify against your turntable and phono stage before ordering.
- Not confirmed: grounding: No ground wire or grounding terminal is described. Follow your turntable and phono stage manuals for grounding.
- Not confirmed: capacitance or shielding: Electrical specifications such as capacitance per meter and shielding type are not supplied, so this guide cannot advise on electrical matching to a moving-magnet or moving-coil cartridge.
A note on price and value
The Link Phono Interconnect is listed at USD 78.00, with a catalog comparison price of USD 120.00. That places it as an accessible step up from a basic stock cable. Whether it is worthwhile depends on the rest of your system: Transparent positions it for an Upgraded Basic system with a good phonograph setup, so it is most likely to make sense when the turntable and phono stage are already sorted.



