Quick answer
To install the Mompush Lithe Double Front Wheel Set, press the release button on the old wheel, slide it off, then align the new swivel wheel and push until it clicks. If the wheel wobbles or sticks, check the axle alignment and debris in the socket.
Before you start
The Lithe Double Front Wheel Set includes three swivel wheels. Each wheel attaches to a dedicated front leg of the stroller. Make sure you have the correct replacement part — the set is designed only for the Lithe Double model.
You do not need tools for installation. The wheels use a push-button release and a spring-loaded axle. If you feel resistance, do not force the wheel — check the alignment first.
When to replace the front wheels
Replace the front wheels when you notice uneven wear, a persistent wobble that cleaning does not fix, or if a swivel no longer rotates freely. The set is a direct replacement part, so you can swap all three at once for consistent performance.
If only one wheel is damaged, you can replace it individually. The other wheels will continue to work normally, but for even wear, replacing the full set is recommended.
Common issues and fixes
Wobble: If a new wheel wobbles, the axle may not be fully seated. Remove the wheel and reinstall, making sure the spring clip engages the groove in the socket.
Stuck swivel: Dirt or sand can jam the swivel mechanism. Rinse the wheel socket with water and let it dry completely before reinstalling. Do not use oil — it attracts more debris.
Uneven wear: If one wheel wears faster than the others, check the stroller frame for bends or damage. A bent leg can cause uneven load distribution.
Installation steps
- Remove the old wheel: Press the release button on the side of the wheel socket. While holding the button, pull the wheel straight down and away from the stroller leg. The wheel should slide off without force. If the button does not press easily, clean the socket with a dry cloth to remove debris.
- Prepare the new wheel: Check that the spring clip on the new wheel axle is clean and moves freely. Align the axle with the socket opening. The wheel should be oriented so the swivel joint faces upward toward the stroller leg. Do not lubricate the axle — it relies on friction fit.
- Install the new wheel: Push the new wheel straight into the socket until you hear a click. Tug gently on the wheel to confirm it is locked. Spin the wheel by hand to check for smooth rotation and full swivel movement. If the wheel does not click, remove it and recheck alignment. Forcing it may damage the spring clip.
- Test the installation: Place the stroller on a flat surface. Push it forward and backward, then turn left and right. The wheels should swivel freely and the stroller should not pull to one side. Listen for clicking or grinding sounds. A persistent wobble after installation usually means the axle is not fully seated — repeat step 3.
Product details
-
Lithe Double Front Wheel Set: The Mompush Lithe Double Front Wheel Set is a replacement part that includes three durable front swivel wheels, specifically compatible with the Lithe Double stroller. Using the correct replacement set ensures proper fit and smooth maneuverability, avoiding alignment issues that can cause wobble or uneven wear.
Lithe Double Front Wheel Set
