What a Macro Reverse Ring Does for Your Nikon 1 Camera

A macro reverse ring adapter lets you mount a lens backward on your Nikon 1 camera body. This reverses the optical path and produces extreme close-up magnification without a dedicated macro lens.

The Fotodiox Macro Reverse Ring for Nikon 1 is a simple metal ring with a Nikon 1 camera mount on one side and a standard filter thread on the other. You screw a lens onto the thread side (using its filter ring) and attach the ring to the camera. The result is a lightweight, all-metal adapter that preserves the lens's original optical quality because it has no glass elements.

Supported Setup Sequence for Reversing a Lens

Follow these steps to attach and use a reversed lens on your Nikon 1 camera. The process is entirely manual.

  1. 1. Choose a lens with a filter thread: Any lens with a filter thread can be used. The thread size must match the adapter's filter side (available in 52mm). Use step-up or step-down rings to fit other thread sizes.
  2. 2. Set the aperture manually (if possible): If your lens has a manual aperture ring, set it to your desired f-stop before mounting. Lenses without a manual ring will default to either wide open or fully stopped down, depending on the lens design.
  3. 3. Screw the lens onto the adapter: Align the filter thread of the lens with the adapter's thread (0.75 pitch) and turn gently until snug. Do not overtighten.
  4. 4. Attach the adapter to the camera body: Mount the adapter's Nikon 1 bayonet onto the camera body as you would a normal lens. Ensure it clicks into place.
  5. 5. Focus manually: Use the lens's manual focus ring. 'Focus-By-Wire' lenses (e.g., some Nikon AF-P lenses) will not work because the adapter has no electrical contacts to power the focusing motor.
  6. 6. Set exposure and meter: Since electronic communication is disrupted, set exposure manually or use the camera's Aperture Priority (stop-down) mode to meter through the lens.
  7. 7. Experiment with lens length and distance: Different lenses produce different magnifications and working distances. Expect to move the camera closer or farther from the subject to achieve focus.

Product Evidence at a Glance

Important Compatibility Checks Before You Shoot

The Macro Reverse Ring works with all Nikon 1 mount camera bodies, including popular models like the J1/J2/J3/J4/J5, S1/S2, V1/V2/V3, and AW1.

On the lens side, you can use almost any lens with a filter thread, not just Nikon 1 lenses. Step-up or step-down rings expand compatibility. However, 'Focus-By-Wire' lenses (such as Canon STM or Nikon AF-P) require power to engage manual focus and will not work because the adapter provides no power.

If your lens lacks a manual aperture ring, the aperture will default to either its widest or smallest opening, depending on the lens. Test your specific lens to confirm behavior.

What the Supplied Information Does Not Cover

The supplied evidence does not specify exact magnification ratios, working distances, or recommended shutter speeds for specific lenses. These vary with lens choice and subject distance. Experimentation is expected.

The adapter does not include any optical elements, so there is no built-in correction for vignetting or distortion. Image quality depends entirely on the lens used and your technique.