Quick answer
Installing the PETKIT Magnetic Dustproof Curtain 2.0 takes about 10 minutes with no tools required. Follow these steps to fit it to your automatic litter box and start blocking dust and litter tracking.
Dustproof Curtain 2.0
Why install a dustproof curtain?
If you use an automatic cat litter box, you know that dust and litter can escape every time your cat exits. The Magnetic Dustproof Curtain 2.0 creates a seamless barrier that reduces tracking of dirt and pet hair across thresholds, helping maintain a cleaner room. Its strong magnetic closure forms an invisible shield that opens and closes automatically as your cat passes through.
What you need before starting
The curtain comes with adhesive strips and magnetic panels. No screws, drill, or extra hardware are required. Make sure the surface where you attach the curtain is clean and dry for the adhesive to hold firmly. If your litter box has a textured or curved surface, the adhesive may not bond as well—consider using a small piece of double-sided tape for extra grip.
Installation steps
- Clean the attachment surface: Wipe the area around your litter box entrance where the curtain will attach. Remove any dust, litter, or moisture. Let it dry completely. A dirty surface reduces adhesive strength—check that the area is fully dry before proceeding.
- Peel and attach the adhesive strips: Peel the backing from the adhesive strips and press them firmly onto the cleaned surface along the top edge of the litter box opening. Hold for 30 seconds to ensure a strong bond. Press firmly and avoid repositioning once the strip contacts the surface.
- Attach the magnetic curtain panels: Align the top of the curtain with the adhesive strips and press the fabric onto the strips. The magnets will automatically pull the two panels together at the center. Make sure the curtain hangs straight and the magnets align evenly—if they don't meet, adjust the fabric slightly.
- Test the magnetic closure: Gently push the curtain panels apart and release. They should snap back together seamlessly. If they don't close fully, check that the magnets are aligned and the curtain isn't twisted. If the closure is weak, the adhesive may not be fully seated—re-press the strips and test again.
- Let the adhesive cure: Wait at least 24 hours before letting your cat use the litter box normally. This allows the adhesive to reach full strength. Avoid pulling or adjusting the curtain during the curing period to ensure a lasting hold.
Product facts
-
Magnetic Dustproof Curtain 2.0: Strong magnetic closure forms a seamless, invisible shield. Your cat can pass through freely while the curtain closes behind them, reducing dust and litter tracking without blocking their movement.
Magnetic Dustproof Curtain 2.0
