Quick Answer
Replacing the Ultraskyn insert in your Main Squeeze The Virgin is straightforward: remove the old insert, clean the shell, then press in the new insert with the correct orientation.
Why a Replacement Insert Matters
The Main Squeeze The Virgin is a discontinued stroker, but replacement inserts like the Vanilla version are still available. The Ultraskyn material mimics realistic texture and feel, but it wears over time. Replacing the insert restores the original sensation and hygiene without buying a whole new toy.
Because the model is discontinued, finding the right insert can be tricky. The Vanilla insert is a direct fit for the original shell, but you must ensure it's seated properly to avoid tearing or poor performance.
What You Need
You'll need the Main Squeeze The Virgin shell, the new Ultraskyn insert (The Virgin - Insert Replacement Vanilla), and a clean, dry workspace. No tools are required, but a small amount of water-based lubricant can help with insertion.
How to Replace the Insert
- Remove the Old Insert: Grip the base of the old Ultraskyn insert and pull it out of the shell. Work it out gently to avoid tearing the shell. If it's stuck, run warm water over the shell to soften the material. Don't yank hard—the shell can crack if forced.
- Clean the Shell: Wash the empty shell with warm water and mild soap or toy cleaner. Rinse thoroughly and let it air dry completely. Any moisture left inside can cause mold or bacteria growth. Make sure the shell is bone-dry before inserting the new insert.
- Lubricate the New Insert: Apply a small amount of water-based lubricant to the outside of the new Ultraskyn insert. This helps it slide into the shell without bunching or tearing. Never use silicone lube—it can degrade Ultraskyn material.
- Insert the New Insert: Hold the shell open with one hand and press the lubricated insert in from the top. Push it down evenly until it seats fully at the bottom. The texture should face inward, toward the center of the shell. If the insert twists or bunches, remove it and restart—don't try to force it straight.
- Check the Fit: Run your finger inside the assembled stroker to confirm the insert is smooth and fully seated. The opening should be flush with the shell's rim. If it's loose, the insert may not be pushed all the way in. A poorly seated insert can slip out during use, so double-check before using.
Product Fact
-
Main Squeeze - The Virgin - Insert Replacement Vanilla: Refresh your stroker with a new Ultraskyn insert with a realistic breaking hymen. Measures 7.5 in. insertable, 3 in. wide. The 7.5-inch insertable length and 3-inch width match the original The Virgin insert, so it fits the discontinued shell perfectly and maintains the same realistic feel.
Main Squeeze - The Virgin - Insert Replacement Vanilla
