Quick answer

To mount your phone safely on a golf cart or push cart, start with a Quad Lock 360 base that matches your surface, attach a compatible adaptor for your existing mount, and always do a twist-and-lock test before driving or walking. The key is using a dual-stage locking system and checking clearance so the phone doesn't hit anything.

Choose the right base for your cart

Golf carts and push carts have different mounting surfaces. For a concealed look on a flat surface like a dashboard or roof pillar, the Quad Lock 360 Base - Concealed Small is a good option. It has a small footprint and a cover to hide screws, and you can choose a Concealed Cable version if you want a charging cable to pass through the base for a cleaner install. If your cart already has a 1-inch RAM socket arm, the 1" Ball Adaptor Motorcycle Kits - Universal Fit lets you integrate Quad Lock with your existing setup. For vehicles with a ball top cap, the Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit works with 1-inch or 20mm socket arms and requires no tools to install.

Install the base securely

Mounting surfaces on golf carts can be curved, textured, or thin. Before drilling or adhering, check that the base sits flush and does not interfere with steering, pedals, or the folding mechanism of a push cart. Use the provided hardware and tighten screws firmly but avoid over-tightening on plastic panels. If you are using a ball adaptor, ensure the socket arm is tightened enough to hold the phone's weight without slipping, but not so tight that you cannot adjust the angle.

Attach your phone and test the lock

Quad Lock cases and universal adaptors use a dual-stage lock: twist to engage, then a secondary lock secures it. After attaching, give the phone a gentle tug to confirm it is locked. On a golf cart, vibration and bumps are constant; on a push cart, the motion is smoother but the phone can still be knocked. Always use the lock and avoid relying on friction alone. If you use a MAG head, ensure the magnetic attachment is aligned and secure before moving.

Position for visibility and reach

Place the mount where you can see the screen without taking your eyes off the path or road for long. Avoid mounting directly in front of an airbag or where it blocks your view. On a push cart, a handlebar mount keeps the phone accessible for scorekeeping or GPS. On a golf cart, a dashboard or roof pillar position often works best. Check that the phone does not hit the roof, seat, or your knees when you get in and out.

Step-by-step installation

  1. Pick the mounting location: Choose a flat, sturdy spot on your golf cart or push cart that does not block controls or your view. Avoid curved or flexible surfaces unless you use a base designed for them. Checkpoint: Sit in the driver's seat or stand behind the push cart to confirm the spot is reachable and safe.
  2. Install the base or adaptor: For a concealed base, mark screw holes, drill pilot holes if needed, and attach with provided hardware. For a ball adaptor, screw it onto your existing RAM arm or ball top cap and tighten by hand. Common mistake: Over-tightening screws on plastic can strip the holes. Tighten until snug, then stop.
  3. Attach the phone and lock it: Twist your Quad Lock case or universal adaptor onto the mount until it clicks, then engage the secondary lock. Tug gently to confirm it is secure. Checkpoint: If the phone moves or rattles, re-seat it and ensure the lock is fully engaged.
  4. Test before you move: Drive a short distance or push the cart a few feet over uneven ground. Watch for any slipping or interference with cart parts. If the mount shifts, stop and adjust the angle or tighten the socket arm.
  5. Adjust for comfort and safety: Tilt the phone so you can glance at it without turning your head far. Make sure it does not block your knees, the steering wheel, or the folding mechanism. Final check: The phone should be secure, visible, and not interfere with operating the cart.

Product facts

  • Quad Lock 360 Base - Concealed Small: Use a Quad Lock® 360 Concealed Base to mount your smartphone with a small footprint. Features a cover to conceal screws and give a quick look. Buy the Concealed Cable version to allow a cable to pass-through the base for perfect aesthetics. This base keeps the install clean and low-profile, which is ideal for golf carts where space is tight and you want a neat look.
  • 1" Ball Adaptor Motorcycle Kits - Universal Fit: Integrate Quad Lock® with your existing motorcycle RAM mount using the Quad Lock® 1” Ball Adaptor Mount. SUPER STRONG MOUNTING The strong, patented dual-stage lock means you can ride with confidence knowing that your phone is secured to your motorbike without the need for cumbersome lanyards, straps, bands or magnets. No matter the terrain. Use your existing 1” RAM socket arm to securely grip the 1” Rubber Ball... If your golf cart already has a 1-inch RAM mount, this adaptor lets you reuse it and benefit from the secure dual-stage lock.
  • Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit: Use Quad Lock® to securely mount your device in your vehicle by combining our Ball Top Cap Adaptors with 1" or 20mm socket arms. EASY TO INSTALL No tools needed. The familiar ball design make it quick and easy to install with your existing setup. Once you've upgrade to Quad Lock mounting, attaching your phone is as easy as twist, lock. Or add our MAG Heads for even easier and secure magnetic attachment. MINIMALISTIC... This adaptor is a simple, tool-free way to add Quad Lock mounting to a cart with a ball top cap, and it works with MAG heads for quick attachment.