Quick answer

Secure the Wooden Camera Universal Dual 15mm Rod Clamp onto your camera rig using the bolt-on 3/8″-16 threads, then attach 15mm rods or compatible accessories.

Why use a dedicated rod clamp

A rod clamp like the Wooden Camera Universal Dual 15mm Rod Clamp gives you a solid mounting point for adding rods or accessories without modifying your camera body. Its dual 15mm ports use LWS spacing, so they align with standard matte box and follow focus setups.

Bolt-on vs. clamp-on: what to know

This clamp uses a bolt-on design with four 3/8″-16 threads that resist twisting. It works with other Bolt-On accessories from Wooden Camera, but it won't fit rigs that lack compatible threaded holes. Check your camera or cage for 3/8″-16 mounting points before buying.

How to install the Wooden Camera Rod Clamp

  1. 1. Locate mounting holes: Find two 3/8″-16 threaded holes on your camera cage or rig. The clamp needs at least two points for a stable bolt-on connection. A common mistake is trying to use only one hole; the clamp will twist under load.
  2. 2. Align the clamp: Position the clamp so the 15mm ports face forward or in the direction you need rods to run. Tighten the bolts finger-tight first. Check that the clamp doesn't block any camera controls or ports before tightening fully.
  3. 3. Secure with a hex key: Use a 3/16″ hex key to tighten the bolts evenly. Do not overtighten; snug is enough to prevent movement. Overtightening can strip the threads or crack the clamp. Stop when you feel resistance.
  4. 4. Insert 15mm rods: Slide your 15mm rods through the clamp ports. Lock them in place using the clamp's locking mechanism (if equipped) or a thumbscrew. Make sure rods are fully seated and not crooked before locking.
  5. 5. Mount accessories: Attach compatible bolt-on accessories (e.g., Universal Accessory Hinge) using the remaining 3/8″-16 threads on the clamp. Only use accessories with a matching 3/8″-16 thread; adapters may introduce play.

Product details

  • Wooden Camera Universal Dual 15mm Rod Clamp (Bolt-On): The clamp has dual 15mm ports with LWS spacing and four anti-twist 3/8″-16 threads. You can mount two 15mm rods at standard spacing, and the anti-twist threads keep the clamp from rotating under load.

    Wooden Camera Universal Dual 15mm Rod Clamp (Bolt-On)

    Wooden Camera Universal Dual 15mm Rod Clamp (Bolt-On)