Quick Answer
Mount the Infiray Rico RS 75 adapter by first preparing the rifle rail, then attaching the adapter with the specified torque, and finally verifying zero retention with a boresight.
Why Proper Mounting Matters
The Infiray Rico RS 75 adapter is designed for a perfect integration of the thermal scope on your rifle. A secure attachment is not just about holding the scope in place—it directly affects your accuracy and the longevity of the device.
A loose or misaligned mount can cause the zero to shift, especially after recoil. This is why the 15mm BH design of the adapter is critical: it ensures the scope sits at the correct height and alignment for your rifle's rail.
Tools and Preparation
Before you start, gather a torque wrench (if available), a boresight or laser bore sighter, and the appropriate hex key for the adapter screws. Clean the rifle rail and the adapter contact surface with a degreaser to remove any oil or debris.
Check that the adapter's mounting surfaces are free of burrs or damage. If the adapter is new, it should be ready to install, but a quick inspection prevents future issues.
Step-by-Step Mounting Process
- Clean the Rail: Use a degreaser to clean the rifle rail and the adapter's contact surfaces. Wipe dry with a lint-free cloth. A clean surface prevents the adapter from shifting during recoil.
- Position the Adapter: Place the adapter on the rail, ensuring the 15mm BH aligns with the scope's mounting point. Slide it to the desired position, typically centered over the receiver. Check that the adapter sits flat and does not rock side to side.
- Tighten the Screws: Hand-tighten the screws first, then use a torque wrench to tighten to the manufacturer's recommended specification (usually 15-20 in-lbs, but verify with your adapter's manual). Tighten in a crisscross pattern to distribute pressure evenly. Over-tightening can strip threads or warp the adapter; under-tightening causes movement.
- Attach the Scope: Mount the Infiray Rico RS 75 thermal scope onto the adapter, ensuring it locks securely. Use the scope's quick-release lever or screws as applicable. Listen for a distinct click or feel a firm stop to confirm proper engagement.
- Verify Zero Retention: Use a boresight or laser bore sighter to align the scope with the rifle's bore. Fire a few test shots at a target to confirm the zero holds after recoil. If the zero shifts, re-tighten the adapter and re-test before relying on it.
Product Fact
-
Adaptateur pour Infiray Rico RS 75: The adapter for Infiray Rico RS75 with a 15mm BH is specially designed to ensure perfect integration of the scope on your rifle. This precise design guarantees a secure fixation, which is essential for maintaining zero and achieving optimal shooting performance.
Adaptateur pour Infiray Rico RS 75
