Quick Answer
The Nexus Bendz Probe Edition is a bendable, vibrating probe designed for targeted prostate stimulation. To use it, bend the shaft to your preferred angle, apply lubricant, insert slowly, and cycle through the 6 vibration modes to find what feels best.
Why Bendable Design Matters for Prostate Play
Unlike rigid probes, the Nexus Bendz Probe Edition lets you adjust the angle of the shaft to match your anatomy. This is especially helpful for prostate stimulation because the prostate is located a few inches inside the rectum, toward the front of the body. Bending the probe slightly forward can help you apply gentle pressure exactly where you want it.
The dual-density silicone balls along the shaft add texture, and the precision tip focuses vibration. Because the toy is fully waterproof and rechargeable, you can use it in the shower or bath without worry.
Common Mistakes to Avoid
A frequent error is bending the probe too sharply before insertion. The silicone is flexible, but extreme angles can reduce vibration transmission or make insertion uncomfortable. Start with a gentle curve and adjust gradually.
Another mistake is skipping lubrication. Even with smooth silicone, the anus produces no natural lubrication. Use a generous amount of water-based lube to ensure comfort and reduce friction.
How to Use the Nexus Bendz Probe Edition: Step by Step
- 1. Charge and Clean: Charge the probe fully using the included USB cable. Wash the toy with warm water and mild soap or a toy cleaner before first use. A full charge takes about 2 hours. Never use silicone-based lube with this toy, as it can damage the surface.
- 2. Bend to Your Angle: Hold the base and gently curve the shaft to a slight forward angle (about 15–30 degrees). This helps direct the tip toward the prostate once inserted. Avoid bending near the base or tip — focus on the middle section. Too sharp a bend may weaken the vibration feel.
- 3. Apply Lubricant: Apply a generous amount of water-based lubricant to the tip, the silicone balls, and your anal opening. Reapply as needed during play. Silicone toys need water-based lube. Oil-based lubes can degrade the material over time.
- 4. Insert Slowly: Press the tip against your anus and gently push inward. Pause after each inch to let your muscles relax. The rippled texture will provide sensation as you go deeper. If you feel pain, stop and add more lube. Never force the toy — the prostate is only about 2–3 inches inside.
- 5. Turn On and Cycle Modes: Press the button at the base to turn on the vibration. Press again to cycle through the 6 modes (steady, patterns, pulses). Experiment with each mode while the probe is in place. Start with a low, steady vibration to get used to the sensation before trying patterns or pulsing.
- 6. Adjust Angle During Play: While the probe is inserted, gently push or pull the base to change the angle of the tip. The bendable shaft allows real-time adjustment without removing the toy. Small movements can make a big difference. If you feel the tip pressing against your prostate, hold that position for a few moments.
- 7. Clean After Use: Wash the probe with warm water and mild soap or a dedicated toy cleaner. Dry thoroughly before storing. Charge it for next time. Because the toy is waterproof, you can rinse it under running water. Store it in a cool, dry place away from direct sunlight.
Product Facts
-
Nexus Bendz Probe Edition - Vibrating Probe: The Nexus Bendz Probe Edition has a bendable shaft with dual-density silicone balls and a precision tip, 6 vibration modes, and is rechargeable and waterproof. The bendable design lets you customize the angle for targeted prostate pressure, while the multiple vibration modes allow you to experiment with different sensations without needing a separate controller.
Nexus Bendz Probe Edition - Vibrating Probe
