Quick answer
Apply your OKC 25th Anniversary Hat Patch with a household iron in about 10 minutes, then care for it by hand washing and avoiding high heat to keep the embroidery and adhesive secure.
Before you start: what you need
You will need a household iron (no steam), a thin cotton cloth or pressing cloth, a flat, heat-safe surface like an ironing board, and your OKC 25th Anniversary Hat Patch. The patch measures 2 1/8 inches wide by 1 1/8 inches long, so it fits neatly on most cap crowns or brims.
Avoid using a steam iron or placing the patch directly on a delicate hat fabric without a cloth barrier. The heat can damage synthetic blends or cause the adhesive to seep through.
Choosing the right hat
This officially licensed patch works best on cotton or cotton-polyester blend caps. Avoid applying it to very stretchy, thin, or waterproof materials, as the adhesive may not bond well. A structured cap with a flat front provides the smoothest surface for a clean application.
How to apply and care for your OKC 25th Anniversary Hat Patch
- 1. Position and pin the patch: Place the patch on your hat where you want it. Use a safety pin or two to hold it in place from the inside of the hat. This prevents shifting during ironing. Common mistake: skipping the pin can cause the patch to slide out of alignment when you press.
- 2. Preheat the iron and prepare the cloth: Set your iron to the cotton setting (medium-high heat, no steam). Place a thin cotton cloth or pressing cloth over the patch to protect the embroidery and hat fabric. Checkpoint: if your iron has a steam function, make sure the water tank is empty and steam is off.
- 3. Apply heat and pressure: Press the iron firmly onto the cloth-covered patch for 15–20 seconds. Do not slide or move the iron. Lift straight up, then repeat for another 15 seconds. For curved hat surfaces, press from the center outward. Common mistake: moving the iron while pressing can distort the patch or cause uneven adhesion.
- 4. Let it cool and check adhesion: Allow the patch to cool completely for 2–3 minutes. Gently lift one edge to see if it is fully bonded. If edges lift, repeat the pressing step for 10 seconds on those areas. Checkpoint: if the patch still feels loose after a second press, you may need to sew the edges for extra security.
- 5. Care for your patched hat: Hand wash the hat in cold water with mild detergent. Do not machine wash or dry. Avoid bleach and fabric softener. Air dry away from direct heat or sunlight. Common mistake: machine washing or drying can loosen the adhesive and cause the patch to peel.
- 6. Store properly: Store your hat in a cool, dry place. Avoid folding or crushing the patched area. If the patch gets wrinkled, press it lightly with a warm iron through a cloth. Checkpoint: prolonged exposure to heat (like a car dashboard) can soften the adhesive and cause the patch to shift.
Product facts
-
OKC 25th Anniversary Hat Patch: Measures 2 1/8 inches wide by 1 1/8 inches long This compact size fits neatly on most cap crowns or brims without overwhelming the hat design.
OKC 25th Anniversary Hat Patch
