Quick answer
Install the 70mai Omni Bundle by mounting the front cam, connecting the hardwire kit for always-on power, and pairing the battery pack for extended recording.
Why the hardwire kit and battery pack matter
The Omni Bundle includes a hardwire kit that taps into your vehicle’s fuse box, providing clean, always-on power without occupying the cigarette lighter. This is essential for parking surveillance and 4G LTE connectivity.
The included battery pack acts as a buffer, preventing the car battery from draining during long parking sessions. It also allows the dash cam to continue recording even if the hardwire kit loses power.
Step-by-step installation guide
- Mount the front dash cam: Clean the windshield area behind the rearview mirror. Peel the adhesive mount’s liner and press firmly onto the glass. Attach the Omni camera until it clicks into place. Adjust the lens for a clear view of the road. Check that the camera is level and not obstructed by the mirror or sun visor before the adhesive sets.
- Route the power cable to the fuse box: Tuck the hardwire kit’s USB-C cable along the headliner and down the A-pillar. Use a trim tool to hide the wire behind the weather stripping. Locate an always-on fuse (for parking mode) and an accessory fuse (for driving mode) using a fuse tester. Double-check the fuse diagram in your vehicle manual; selecting the wrong fuse can drain the battery or cause a short.
- Connect the hardwire kit: Insert the hardwire kit’s fuse taps into the chosen fuse slots. Connect the ground wire to a bare metal bolt near the fuse box. Plug the USB-C end into the dash cam. Tuck any excess wire and secure the hardwire module with double-sided tape or a zip tie. Ensure the ground connection is on clean, unpainted metal; a poor ground can cause intermittent power loss.
- Pair the battery pack: Connect the battery pack to the hardwire kit’s pass-through port (or directly to the dash cam if using the included splitter). Place the battery pack in the glove box or under a seat, securing it with the provided Velcro strap. Verify the pack’s LED indicates charging. Position the battery pack away from direct sunlight and moving seat rails; heat and physical damage can reduce battery life.
- Test the system: Turn on the ignition and confirm the dash cam powers on and the battery pack LED shows charging. Turn off the ignition and wait 10 seconds; the camera should enter parking mode and the battery pack should supply power. Use the 70mai app to verify 4G LTE connectivity and adjust settings. If the camera doesn’t enter parking mode, check the hardwire kit’s voltage cutoff setting in the app; adjust it to match your vehicle’s battery health.
Product facts
-
Omni Bundle: Front Cam + Hardwire Kit + Battery Pack: The Omni Bundle combines a 70mai Dash Cam Omni with a hardwire kit and a battery pack, offering a complete setup for continuous vehicle monitoring and convenient power management. You get everything needed for 24/7 parking surveillance in one package, simplifying installation and ensuring compatibility.
Omni Bundle: Front Cam + Hardwire Kit + Battery Pack
