Quick answer

Painting the clear Phoenix RC cab requires proper surface prep, Lexan-specific paint, and careful masking. Follow these steps to get a durable, professional-looking finish.

Why paint a clear cab?

The Phoenix Cab Only - Clear comes unpainted, giving you full control over the color and design. This is ideal for custom builds or matching your rig's theme. However, clear Lexan requires special paint and preparation to avoid peeling or cracking.

Step-by-step painting guide

  1. Clean the cab thoroughly: Wash the inside of the clear cab with warm water and mild dish soap to remove any mold release or oils. Rinse and let dry completely. Do not skip cleaning; any residue will cause paint to peel.
  2. Mask off windows and details: Use the included window mask or low-tack painter's tape to cover windows and any areas you want to remain clear. Press edges down firmly. Take extra care around corners to prevent paint bleed.
  3. Apply a primer coat (optional but recommended): Spray a light coat of Lexan-compatible primer on the inside of the cab. This helps the color coat adhere and reduces the chance of paint flaking. Use only primer formulated for polycarbonate; standard primers may crack.
  4. Spray the color coats from the inside: Apply 2-3 thin coats of polycarbonate-specific spray paint (e.g., Tamiya PS or Createx) to the inside of the cab. Let each coat dry 15-20 minutes before the next. Spraying inside protects the finish from scratches. Avoid thick coats that can run or cause orange peel.
  5. Add a backing coat for durability: Once the color coats are dry, apply a backing coat (silver or white) to block light and give the color depth. This also protects the paint from UV damage. Never skip the backing coat on a clear cab; the color will look thin and may fade.
  6. Remove masking and apply decals: Carefully peel off all masking. Apply the included die-cut decals or your own custom graphics. Use a hairdryer to soften decals over curves. Wait at least 24 hours before handling the cab to let paint fully cure.

Product details

  • Phoenix Cab Only - Clear: Clear Lexan cab, 100% cut, no trimming required. Includes window trim and body decal sheet. Requires painting with polycarbonate/Lexan-specific paint. Because the cab is pre-cut, you save time on trimming but must still properly prep and paint the Lexan for best adhesion and durability.

    Phoenix Cab Only - Clear

    Phoenix Cab Only - Clear