Start with how the poster arrives

A Frameology poster is printed edge-to-edge on 270 GSM paper with a glossy or satin finish and arrives rolled in a tube. That packaging protects the print in transit, but it also means the first thing you handle is a curled sheet, not a flat one. The catalog confirms the tube but does not list hanging hardware, so plan your frame or hanging method separately.

Because the poster is unframed when it reaches you, most damage happens in the first few days: creased corners from unrolling too fast, fingerprints on the image side, or a print left curled in a warm spot. A little patience at this stage prevents most of the problems people later blame on the paper.

How to unroll and handle a rolled poster

Work on a clean, flat surface larger than the poster. Wash and dry your hands first; glossy and satin finishes both show smudges, and paper picks up oils easily.

  1. Open the tube and let the poster slide out: Avoid pulling hard on the edge of the print. If it resists, tilt the tube and let gravity help rather than tugging the paper.
  2. Unroll slowly, image side up: Support the sheet with both hands as it opens. Rushing is what causes sharp bends and corner creases.
  3. Handle by the edges only: Keep fingers off the printed area. On a glossy finish, marks are especially visible under light.
  4. Set it down flat before doing anything else: Do not try to frame or hang a poster while it is still tightly curled. Flatten it first.

Poster flattening tips that do not risk the print

The goal is to relax the curl without pressing anything into the image. The catalog does not supply a specific flattening method, so treat the following as general handling guidance rather than a manufacturer instruction.

  • Give it time under light, even weight: Place the poster image side up on a clean surface and lay clean, flat boards or books across it. Keep the weight even so no single edge takes the pressure.
  • Avoid direct heat: Do not iron a poster or leave it near a radiator or in a hot car to speed up flattening. Heat can distort paper and is not a confirmed-safe method for this print.
  • Check before you frame: Lift one corner gently. If the sheet still rolls back on its own, give it more time rather than forcing it into a frame.
  • Keep the tube for transport: The original tube is useful if you move or store the poster later. Store it dry and out of sunlight.

What the poster itself tells you about care

  • Poster: Printed on 270 GSM paper with a glossy or satin finish. Paper weight and finish both affect how easily the sheet creases and how visibly it shows fingerprints, so handle it by the edges.

    Poster

    Poster

  • Poster: Arrives rolled in a tube and does not include hanging hardware. Plan for framing or hanging before the poster arrives, and expect to flatten the print first.

  • Poster: Lightweight and available in sizes up to 32x48. Large sheets are more prone to bending under their own weight, so support the whole poster when lifting it.

Poster storage tips for prints you are not hanging yet

If a poster will wait before it goes on the wall, store it flat wherever possible. Rolled storage is a fallback, not the default, because it reintroduces the curl you just worked out.

  • Store flat between clean boards: Use a flat surface away from foot traffic. Acid-free board or clean paper between layers helps keep the surface free of dust and scuffs.
  • Keep it out of damp and heat: Avoid basements, garages, and spots near radiators or windows. Paper responds to moisture and heat, and both can undo your flattening work.
  • Do not stack heavy objects on the image: If you must stack, keep the poster at the top and use only light, flat weight.
  • Label the tube if you roll it again: Write on the outside of the tube, never on the poster, so you know which print is inside without opening it repeatedly.

Keeping posters from fading before and after hanging

Fading is driven mainly by light, especially direct sun. The catalog does not make a UV-resistance claim for this poster, so the safe approach is to limit exposure rather than assume the print can take it. Keep unframed posters out of direct sunlight while they wait, and when you hang one, choose a wall that avoids strong afternoon sun.

If the spot you want is bright, framing behind glass or acrylic that offers UV filtering is a common way to reduce light exposure. That is a framing choice, not a confirmed feature of the poster itself, so treat it as protection you add rather than something built in.

Glossy or satin: a quick care difference

Both finishes use the same 270 GSM paper, but they behave differently in everyday handling. The catalog offers both, so choose with care in mind as well as looks.

  • Glossy: Reflective and vivid, but fingerprints and smudges show more readily. Handle by the edges and keep it away from greasy surfaces.
  • Satin: Less mirror-like, so marks are generally less obvious. Still handle by the edges and keep the surface clean.

When the damage is not something you can fix

Creases that have broken the paper surface, deep indentations, or water stains will not flatten out with weight. If a print arrives damaged, stop handling it and contact the store rather than trying heat or pressure, which can make a crease worse. For everything else, slow unrolling, flat storage, and limited light cover most of the care a Frameology poster needs.