Quick answer

Start by choosing one anchor wall and mapping your pennants and magnets on paper before you poke any holes. Group pennants in a fan or row at eye level, keep magnets on a metal strip or magnetic board so they stay put, and add a small spotlight to make the colors pop. This approach protects your gear and gives your fan cave a clean, game-day look.

Plan the wall before you hang anything

Measure your wall and decide which section gets the most traffic. Pennants read best at 60 to 72 inches from the floor, roughly eye level, so they stay visible whether you are standing or sitting. Magnets need a surface that will hold them without sliding, so plan a metal strip, magnetic board, or a dedicated shelf edge rather than a painted wall. Sketch the layout on paper or use painter's tape to mock up each piece. This step saves you from patching holes later and helps you see spacing problems before they become permanent.

Choose the right hanging method for pennants

Pennants are lightweight, so you have options. For a single pennant, a small finishing nail or a removable adhesive hook works. For a row of three or more, run a thin wooden strip or a piece of twine across the wall and clip each pennant to it. This keeps the spacing even and lets you swap pennants without new holes. If you rent or want to avoid damage, use damage-free adhesive strips rated for the weight of your pennant plus a little extra. Test one strip first and let it set for an hour before adding the rest.

Give magnets a dedicated surface

Magnets lose their charm when they slide behind a shelf or fall behind furniture. A magnetic board, a metal strip, or the side of a metal cabinet gives them a stable home. Mount the board at a height where you can reach it easily, and leave a little space between magnets so each one stands out. If you have a collection that changes with the season, use a magnetic board with a frame so you can rotate pieces without rehanging anything. Avoid placing magnets directly on painted drywall unless they are decorative and not expected to hold anything.

Layer lighting to make the display pop

A small LED spotlight or a strip of warm-white LEDs aimed at your pennant row makes the colors and logos stand out without washing them out. Place the light source above or to the side, not directly in front, to avoid glare. If your fan cave has a ceiling fan or a window, check how shadows fall during the day and at night. Battery-powered puck lights are an easy option when you do not want to run wiring. Just make sure the light does not produce heat that could fade or warp your memorabilia over time.

Keep the display flexible for new finds

Your collection will grow, so leave room on the wall and on the magnetic board. Use a consistent hanging height and a neutral background color so new pieces fit in without a full redo. If you add a cap or a tee later, group it near the pennants to create a team-focused zone. Rotate pieces every few months to keep the fan cave setup feeling fresh and to spread out any light exposure. A small label or a photo of the original layout can help you remember where things go if you take them down for cleaning.

Step-by-step fan cave display plan

  1. Step 1: Pick your anchor wall and clear the space: Choose a wall that gets good light and is not blocked by furniture. Remove existing decor and wipe the wall clean so adhesive strips or nails hold properly. Checkpoint: stand back and confirm the wall is visible from your main seating spot.
  2. Step 2: Lay out pennants and magnets with painter's tape: Use tape to mark where each pennant and magnet will go. Keep pennants at a consistent height and group magnets on a board or metal strip. Adjust spacing until the arrangement feels balanced. Checkpoint: take a photo of the tape layout so you can recreate it if you move things.
  3. Step 3: Hang pennants first, then mount the magnet surface: Install your pennant row using nails, clips, or adhesive hooks. Then mount your magnetic board or metal strip at a comfortable reach. Add magnets one at a time, stepping back to check the overall look. Checkpoint: tug gently on each pennant and magnet to make sure nothing slips.
  4. Step 4: Add lighting and rotate pieces as needed: Position a small LED light above or beside the display to highlight logos without glare. Every few months, swap in different pennants or magnets to keep the fan cave setup interesting. Checkpoint: make sure the light does not produce heat that could damage your memorabilia over time.

Quakes gear that works well in a fan cave display

  • Rancho Cucamonga Quakes 12 oz Can Cooler x LAA: Rancho Cucamonga Quakes 12 oz Can Cooler x LAA features the Quakes Q halo logo on one side and the Los Angeles Angels logo on the other. The two-sided design gives you a small, displayable piece that ties your fan cave to both the Quakes and the Angels, and it can sit on a shelf when not in use.
  • Rancho Cucamonga Quakes Cap-Rancho Halo Upside Down: Rancho Cucamonga Quakes Cap-Rancho Halo Upside Down has a snapback closure for an adjustable fit and features the upside down Rancho Halo logo. A cap adds height and texture to a wall display, and the adjustable snapback means it can hang on a hook or a cap rack without losing its shape.
  • Rancho Cucamonga Quakes Tee-Big Team Logo: Rancho Cucamonga Quakes Tee-Big Team Logo is described as a very limited edition tee with a big team logo and is available in multiple sizes. A folded or framed tee can anchor a fan cave wall, and the limited-edition note makes it a piece worth displaying rather than storing in a drawer.