Quick Answer

The Replacement Breast Shield 22-24mm is a silicone insert that fits inside BabyBuddha Express Cups to provide a comfortable seal while maintaining the pump's hospital-grade suction. Proper fit and regular care keep it effective.

Why Fit Matters for the 22-24mm Shield

Getting the right nipple fit inside the shield is key to both comfort and output. The silicone material is flexible, but if the tunnel is too narrow or too wide, you may experience friction, reduced milk flow, or loss of suction. Measure your nipple diameter before use, and choose 22mm or 24mm based on that measurement—not on guesswork. A correctly fitted shield allows gentle movement without rubbing.

Frequently Asked Questions

How do I know if I need a 22mm or 24mm shield?

Measure the diameter of your nipple (not the areola) at its widest point. If it's 21mm or smaller, start with 22mm. If it's 22-23mm, choose 24mm. The shield should fit snugly without pinching or leaving a deep indentation after pumping.

How often should I replace the breast shield?

Replace the silicone shield every 3-4 months with regular use, or sooner if you notice cracks, tears, stretching, or a change in suction. Silicone naturally degrades over time, and a worn shield can reduce pump performance. Mark your calendar or set a phone reminder to check the shield condition monthly.

How do I clean the 22-24mm shield?

After each use, rinse the shield with cool water, then wash with warm soapy water and a dedicated brush. Rinse thoroughly and air dry on a clean towel. You can also steam sterilize or boil for 5 minutes once daily. Avoid harsh detergents or scrubbing that could damage the silicone.

Can I use this shield with other pump brands?

The 22-24mm Replacement Breast Shield is designed specifically for BabyBuddha Express Cups. It may not fit or seal properly in other brands' flanges or collection cups. For best results, use only with BabyBuddha wearable parts. Using the shield outside its intended system may void warranty or reduce suction.

What if the shield feels loose or leaks?

First, check that the shield is fully seated inside the Express Cup—press the rim until it clicks into place. If it still leaks, inspect for damage or wear. A loose fit may also mean you need a different size. Consider trying the other size (22mm vs 24mm) to see if it improves the seal. A small drop of breast milk or coconut oil on the rim can help create a better seal without affecting suction.

Product Details

  • Replacement Breast Shield 22-24mm: Designed to maintain the hospital-grade strength the BabyBuddha double electric pump is known for, these breast shields slip inside the Express Cups to maintain your comfort. This means you get the portability of a wearable pump without sacrificing the suction power you rely on for efficient pumping.

    Replacement Breast Shield 22-24mm

    Replacement Breast Shield 22-24mm