Quick answer

Buy the Revell Email Color space set if you want a compact, mixable 6x14ml enamel palette for sci-fi and space subjects and you're comfortable with solvent-based paint, brush or airbrush. Skip it if you need water cleanup or a single set that covers a whole car or tank in authentic military colors; a larger enamel range or water-based paints will serve you better.

A space model lives or dies on its finish: the wrong grey reads as toy-like, the right one reads as hull plating. The Revell Email Color space set is built around that idea, packing six 14ml enamel pots aimed at sci-fi subjects rather than a full military or automotive range.

This guide breaks down what those 6x14ml pots actually give you, how Revell Color enamel behaves on plastic, and which builders should put it in the basket. It also flags when a different paint set is the smarter buy.

What the 6x14ml format actually means for a space build

Six 14ml pots is a deliberate middle ground. It's enough to cover a small-to-mid sci-fi kit without buying a dozen single colors, but not so much that you're paying for shades you'll never open. Revell Color is a synthetic resin enamel that does not attack the plastic surface of plastic models, so you can brush it straight onto bare styrene without a barrier coat.

The 14ml can is the size many hobbyists already know from the Revell range, and all colors except signal color can be mixed with each other and thinned with Revell Color Mix. That matters more for space subjects than for military ones, because sci-fi schemes are usually custom greys, blues and panel shades you blend yourself rather than match to a reference chart.

  • Plan on mixing: treat the six pots as a base palette, not six finished colors.
  • A 14ml pot goes a long way when thinned for airbrush use, but brush-painting large hulls will drink it faster.
  • Buy Revell Color Mix at the same time if you intend to spray.

Enamel trade-offs you should accept before buying

Enamel gives a hard, smooth, slightly self-levelling finish that hides brush marks well, which is exactly what you want on large flat Star Destroyer surfaces. The cost is drying time and cleanup: you're working with solvent-based paint, so you need ventilation, and brushes and airbrush parts need proper solvent cleaning rather than a rinse under the tap.

If you already build with Revell enamel, this set slots into your workflow with no new habits. If you've only used water-based acrylics, be honest about whether you want to add a second paint system, thinner and cleaning routine to your bench for one project.

  • Ventilate the room and keep solvent away from children and open flames.
  • Don't mix enamel and acrylic thinners; keep separate brush pots.
  • Enamel over cured enamel is safe; acrylic over fresh enamel is not worth the risk.

Pair the set with a kit that suits it

The set makes most sense when the model itself is a space subject. The Model Set Imperial Star Destroyer is a natural match: it has finely engraved surfaces, a replica of the command bridge and engine replicas, all of which reward a controlled grey-and-panel paint job rather than a single flat coat. It also includes a display stand, so the finish is what people actually see.

If you'd rather practice the enamel workflow on something smaller and cheaper first, a compact kit lets you test thinning ratios and dry times before committing to a large hull. The same six-pot palette can also handle non-space subjects in a pinch, but you'll be mixing every shade rather than opening the right one.

  • Engraved panel lines show up best with thin, built-up coats rather than one heavy pass.
  • Paint the display stand too; an unpainted base undercuts a finished model.
  • Test your mix on the inside of a hull half before touching visible surfaces.

Where the set fits in a wider paint collection

Think of this as a specialist addition, not a starter kit. A dedicated space set won't cover a Leopard 2A6M in its correct scheme, and it won't give you the body color for a '62 Shelby Cobra 289. Those kits are better served by their own matched paint sets or by buying individual colors.

Where it earns its place is as the sci-fi corner of your paint drawer: six mixable enamels you can reach for whenever a subject needs cool greys, hull tones and panel variation. If you build mostly military or automotive subjects, buy the colors for those instead and add this only when a space kit lands on the bench.

  • Buy for the subject in front of you, not for a hypothetical future kit.
  • If you build one space model a year, individual pots may be cheaper than a set.
  • If you build several, a set plus Revell Color Mix is the efficient route.

Decision rules: buy the space set or not

  • Rule 1: Subject first: If your next kit is a space or sci-fi subject with large grey surfaces and panel detail, the set earns its place. If it's a tank, car or aircraft needing reference-matched colors, buy those colors instead. Match the set to the model on your bench, not to a wishlist.
  • Rule 2: Accept the enamel workflow: You need ventilation, solvent cleanup and patience with drying times. If water cleanup and fast recoats matter more to you than finish quality, choose a water-based paint system. Don't buy a second paint chemistry you won't maintain.
  • Rule 3: Budget for thinner: The six pots are a base palette. If you plan to spray, add Revell Color Mix so you can thin and clean properly rather than brush-only. The set is the start of the spend, not the whole of it.
  • Rule 4: Volume check: Six 14ml pots cover a small-to-mid kit comfortably. For a very large hull, expect to mix and possibly buy a second pot of your main grey. Estimate coverage before you start a big subject.

Catalog facts worth knowing

  • Matt "USAF Gunship-Grey" Email Color Enamel - 14ml: Revell Color is a synthetic resin enamel paint that does not attack the plastic surface of plastic models, and the 14 ml can can also be used on many other materials. All colors except signal color can be mixed with each other and diluted with Revell Color Mix, so the paint can be applied with a brush or a spray gun. This is the same enamel system as the space set, so the behavior you learn here transfers directly: safe on bare styrene, mixable, and airbrush-ready once thinned.
  • Model Set Imperial Star Destroyer: The kit has finely engraved surfaces, a replica of the command bridge, engine replicas and a display stand. It includes solvent-based glue and water-soluble paints, and carries warnings that it is not suitable for children under 8 years. A grey-heavy space subject with engraved detail is exactly the case where a mixable enamel palette pays off, and the included stand means the paint job is the centerpiece.
  • Model Set Leopard 2A6-A6M: A 1:72 scale replica of the Leopard 2A6M main battle tank, described as a high-quality model kit with impressive detail and authenticity. A modern armor subject needs its own matched military colors, so a sci-fi-oriented set is not the right purchase for this kit.

Who should buy this set

Best for

  • Builders of sci-fi and space subjects who want a compact, mixable enamel palette
  • Hobbyists already using Revell Color enamel who want a dedicated space selection
  • Modelers who brush or airbrush and are set up for solvent-based paint

Not for

  • Anyone wanting water cleanup or a low-odor paint
  • Military or automotive builders who need reference-matched colors
  • Beginners looking for a single all-purpose starter paint set

If your shelf has a Star Destroyer or similar space kit waiting, the Revell Email Color space set is a sensible, mixable six-pot palette that rewards a bit of practice. If your next build is armor or a car, put the money into the right colors for that subject instead.