Quick answer

The Router Stop Pin + Safety Guard Kit is a two-in-one accessory for router tables: it gives you a precise stop block for repeat cuts and a clear acrylic guard that keeps hands away from the bit. It works with any mounting plate that has a 6.35mm threaded hole and installs without drilling.

Why combine a stop pin and a guard?

Separate stop blocks and guards exist, but this kit mounts both on the same plate. That saves space on a small router table and reduces setup time. The stop pin handles repeatability; the guard handles safety. Together they let you focus on the cut instead of juggling accessories.

Trade-off: not for every router table

The kit requires a mounting plate with a 6.35mm threaded hole. If your table uses a different thread size or has no threaded hole at all, you cannot install it without modifying the plate. Also, the guard is height-adjustable but not width-adjustable, so very wide workpieces may not fit under the guard's acrylic window.

Decision rules

  • Check your mounting plate: Look for a 6.35mm threaded hole on your router table plate. If present, the kit installs without drilling or adjustments. If absent, you will need to drill a compatible hole or choose a different accessory.
  • Decide if you need a stop block: Use the stop pin when you make repeated identical cuts, such as tenons or dadoes. For one-off cuts, a fence-mounted stop is simpler and faster to adjust. If you rarely repeat cuts, a dedicated guard-only accessory may be more practical.
  • Evaluate workpiece size: The acrylic guard is height-adjustable but not width-adjustable. Very wide boards may not fit under the guard. Measure your typical workpiece width against the guard opening before buying. For narrow or medium-width workpieces, the guard works well. For panels wider than the guard opening, consider a separate overhead guard.

Product facts

  • Router Stop Pin + Safety Guard Kit: Compatible with all 6.35mm threaded hole mounting plates If your router table plate already has that hole, installation takes seconds and requires no drilling.

    Router Stop Pin + Safety Guard Kit

    Router Stop Pin + Safety Guard Kit

  • Router Stop Pin + Safety Guard Kit: Height-adjustable safety guard made of sturdy acrylic glass You can raise or lower the guard to match the workpiece thickness while keeping a clear view of the bit.

Who it's for

Best for

  • Router table owners who want one accessory that does both repeat cuts and bit shielding
  • Woodworkers with a mounting plate that already has a 6.35mm threaded hole

Not for

  • Users whose router table plate lacks a 6.35mm threaded hole and who prefer not to drill
  • Woodworkers who regularly route very wide panels that exceed the guard opening