Quick Answer

For a secure and repeatable scope mount on your Blaser or Sauer, choose a dedicated quick-release system like the INNOMOUNT QD Fortuna and follow the installation steps below to ensure proper torque and alignment.

Why a Dedicated Mount Matters

Blaser and Sauer rifles have a unique receiver geometry. A generic mount may not align perfectly, causing stress on the scope tube or inconsistent zero. A dedicated quick-release mount, like the INNOMOUNT QD for the Fortuna model, is machined to fit these receivers precisely.

The quick-release mechanism lets you detach and reattach your scope without losing zero, provided the mount is installed correctly and the locking surfaces are kept clean.

Installation Steps

  1. Prepare Your Rifle: Ensure the rifle is unloaded and the receiver is clean. Remove any existing mount bases and wipe the mounting area with a lint-free cloth. A clean surface prevents misalignment and ensures the mount seats properly.
  2. Position the Mount: Place the quick-release mount on the receiver, aligning the recoil lug or locating pins with the corresponding slots. Do not force it; it should sit flush without play. If it doesn't sit flush, check for debris or burrs on the receiver.
  3. Tighten the Clamping Screws: Hand-tighten the clamping screws in a cross pattern, then use a torque wrench to tighten to the manufacturer's recommended specification (usually 15-20 in-lbs, but check your mount's manual). Over-tightening can warp the mount or strip threads. Use a torque wrench to avoid over-tightening, which can damage the mount or affect zero.
  4. Attach the Scope Rings: If your mount uses separate rings, attach the bottom halves to the mount, place the scope in, and then add the top halves. Align the scope so it is level and the reticle is vertical. A level scope is crucial for accurate long-range shooting.
  5. Torque the Ring Screws: Tighten the ring screws gradually in a crisscross pattern to the recommended torque (often 15-18 in-lbs). Do not overtighten, as this can deform the scope tube. Consistent torque ensures the scope doesn't shift under recoil.
  6. Test the Quick Release: Detach and reattach the mount several times to confirm the locking mechanism engages fully and consistently. Check that the mount clicks into place securely each time. If the mount doesn't lock consistently, re-check the alignment and cleanliness.

Product Facts

  • Montage amovible Blaser - Sauer - Fortuna: The INNOMOUNT QD for Blaser, Sauer, and the Fortuna model by General One offers a quick and secure attachment. This dedicated design ensures a stable platform for your scope, which is essential for maintaining accuracy and repeatable zero.

    Montage amovible Blaser - Sauer - Fortuna

    Montage amovible Blaser - Sauer - Fortuna

  • Montage rapide amovible pour Blaser - Sauer: The INNOMOUNT QD for Blaser and Sauer provides a fast and secure fit for the Fortuna model by General. It's a reliable choice for hunters who need to swap scopes quickly without compromising on stability.

    Montage rapide amovible pour Blaser - Sauer

    Montage rapide amovible pour Blaser - Sauer