What the BOHIN Maintenance Kit Contains
The BOHIN kit d'entretien pour machine à coudre brings together three tools designed for routine cleaning: a 10 cm brush, an 11 cm large screwdriver, and an 8 cm small screwdriver. These are the essentials for reaching into the nooks of your sewing machine to remove dust, lint, and thread residue.
A regular cleaning routine with these tools helps preserve your machine's performance and extend its life. The kit's compact design means you can store it near your sewing station and use it often.
Kit Contents at a Glance
-
Kit d'entretien pour machine à coudre: Composé de deux tournevis et d'un pinceau, il permet d'accéder facilement aux différentes parties de la machine afin de retirer les poussières, les résidus de fil et d'effectuer les opérations de maintenance courantes. This confirms the kit is purpose-built for cleaning and basic maintenance, not for repairs or adjustments that require specialized tools.
Kit d'entretien pour machine à coudre
-
Kit d'entretien pour machine à coudre: 1 pinceau (10 cm), 1 grand tournevis (11 cm), 1 petit tournevis (8 cm) The two screwdriver sizes let you work on different screw types and depths, while the brush is long enough to reach into the bobbin area and feed dogs.
How to Use the Kit for Routine Cleaning
Regular maintenance with this kit is straightforward. Follow these steps after every few hours of sewing or whenever you notice lint buildup.
- 1. Unplug your machine: Always disconnect the power before opening any compartment or inserting tools near moving parts.
- 2. Remove the needle and presser foot: This gives you clear access to the throat plate and bobbin area where lint collects most.
- 3. Brush out the bobbin case and feed dogs: Use the 10 cm brush to sweep away lint and thread fragments. Pay special attention to the area around the feed dogs and the bobbin case.
- 4. Use the small screwdriver for tight spots: The 8 cm screwdriver can help dislodge compacted lint in narrow gaps, but avoid forcing it into places that might damage delicate parts.
- 5. Check and clean the tension discs: If your machine has accessible tension discs, use the brush to remove any thread dust that may cause uneven tension.
- 6. Reassemble and test: Replace the needle and presser foot, rethread the machine, and sew a few stitches on scrap fabric to confirm everything runs smoothly.
What the Kit Does and Doesn't Do
The BOHIN maintenance kit is designed for cleaning and basic screw access—tasks like removing the needle plate or accessing the bobbin area. It is not a repair kit and does not include oil or lubricant. For oiling, you will need a separate sewing machine oil and follow your machine's manual for specific lubrication points.
The supplied information does not specify which screw types or machine brands the screwdrivers fit. If your machine uses unusual screw heads (such as Torx or Phillips #1 versus #2), check compatibility before purchase. For most standard domestic machines, these tools should work well.



