Quick Answer
If your SimXPro shifter handbrake mount XRS80 doesn't fit, first check profile alignment and bracket placement—most issues are solved by loosening, adjusting, and retightening. If it still won't fit, you may need a different mount for your cockpit.
Why Fitment Issues Happen
The SimXPro shifter handbrake mount XRS80 is designed for aluminium profile cockpits, but even with the right product, small misalignments can cause frustration. Common reasons include profile slots not lining up, bracket orientation flipped, or bolts catching on the profile edges.
Before assuming the mount is defective, take a moment to inspect your cockpit's profile layout. The mount needs clean, parallel slots to slide into; any slight twist in the frame can make the bracket appear too tight or too loose.
Diagnosis and Fix Steps
- Symptom: Mount doesn't slide onto the profile: Loosen all bolts on the bracket and check if the profile slots are clean and free of debris. Try sliding the mount on from the end of the profile rather than forcing it mid-way. If it still doesn't slide, measure your profile slot width—the mount may not be compatible.
- Likely cause: Bracket orientation is reversed: Flip the bracket 180 degrees and try again. The offset on the XRS80 mount is directional; reversing it often solves clearance problems with the shifter or handbrake. If flipping doesn't help, check if the bracket is hitting the profile's T-nuts.
- Corrective action: Adjust position and retighten: Position the mount where you want it, then tighten bolts gradually in a cross pattern. This ensures even pressure and prevents the bracket from twisting. After tightening, test the shifter and handbrake movement to confirm stability.
- Stop point: When to consider another option: If the mount still doesn't fit after checking alignment, orientation, and hardware, your cockpit may have non-standard profile dimensions. Consider a universal mount or contact support for compatibility advice. Don't force the mount—this can damage the bracket or your profile.
Product Facts
-
SimXPro Shifter - handbrake mount XRS80 - Black: Designed for aluminium profile cockpits and supports a tidy shifter or handbrake mount. This mount is meant to integrate with your existing profile frame, so fitment depends on your cockpit's slot alignment and bracket placement.
SimXPro Shifter - handbrake mount XRS80 - Black
