What the Standard Case offers for iPhone 14
The Standard Case for iPhone 14 models is a minimal protective case with an anodized all-black aluminum lens mount. It is designed to work with SANDMARC's lineup of Anamorphic, Wide, Telephoto, Fisheye, Microscope, and Macro lenses. The case fits iPhone 14, iPhone 14 Plus, iPhone 14 Pro, and iPhone 14 Pro Max — each requires the correct variant.
The mount is built into the case, so there is no separate adapter to lose. This guide covers the setup steps and what to check before you start shooting.
Mounting a lens on the Standard Case
Follow these steps to attach a SANDMARC lens to your iPhone 14 Standard Case. The process is the same for all compatible lenses.
- 1. Install the case on your iPhone 14: Slide your iPhone into the Standard Case. Make sure the case fits snugly around the device, especially around the camera bump. The aluminum mount should align with the rear camera module.
- 2. Choose your lens: Select any SANDMARC lens from the compatible list: Anamorphic, Wide, Telephoto, Fisheye, Microscope, or Macro. Each lens has the same bayonet-style mount that clicks onto the case.
- 3. Align and attach the lens: Hold the lens so its mounting ring matches the case mount. Press gently and rotate clockwise until you feel a firm stop. Do not overtighten — a snug fit is enough.
- 4. Verify alignment: Open the Camera app and check that the lens covers the main sensor without vignetting. If the image looks off-center, remove the lens and reattach it with a slight rotation adjustment.
- 5. Remove the lens when not in use: Twist the lens counterclockwise to detach it. Store it in a clean, dry place. The case mount stays on your phone, so you can reattach the lens quickly later.
Standard Case compatibility and features
-
Standard Case - iPhone 14 Models: The Standard Case for iPhone 14 models is compatible with SANDMARC Anamorphic, Wide, Telephoto, Fisheye, Microscope, and Macro lenses. You do not need to buy a separate mount or adapter for each lens type — the same case works with the entire SANDMARC lens system.
Standard Case - iPhone 14 Models
-
Standard Case - iPhone 14 Models: The case features an anodized all-black aluminum lens mount. The metal mount is durable and resists scratches, so it stays looking clean after repeated lens swaps.
-
Standard Case - iPhone 14 Models: Available variants: iPhone 14, iPhone 14 Plus, iPhone 14 Pro, and iPhone 14 Pro Max. Order the variant that matches your exact iPhone model. The case is not universal across the series.
When the mount may not align
If the lens does not sit flush or the camera app shows a black corner, the case may not be seated fully. Remove the case and reinstall it, pressing firmly around the camera cutout. Check that no debris is trapped between the case and the phone.
The mount is designed for the main camera only. It does not cover the ultrawide or telephoto lenses built into the iPhone 14 Pro models. Use the main camera for all SANDMARC lens shots.



