Quick answer

Clean TESSERACT deluxe dice with a soft dry cloth first, spot-clean only when needed with a barely damp cloth, dry them completely, and store the full 64-piece set in a padded container with individual slots or dividers. Keep the set away from loose metal, moisture, and direct sunlight so the finish and markings stay intact between game nights.

A 64-piece metal dice set is a different care commitment than a handful of plastic dice. The TESSERACT dice sit on a rotating platform and get handled from every angle, so fingerprints, skin oils, and table grit build up across the whole set. A simple routine keeps the finish even and the dice ready to read at a glance.

You do not need specialty cleaners or a workshop. You need a soft cloth, a place to dry the dice fully, and a storage setup that stops metal-on-metal contact. The steps below work for the full TESSERACT set and for any metal dice you keep alongside it.

Why metal dice need a different routine

Metal dice hold a finish differently than plastic. Oils from hands can dull a polished or coated surface over time, and grit trapped between dice can leave fine scratches. Because TESSERACT uses a cube of 64 dice on a rotating platform, every piece is exposed during play, so wear shows up evenly rather than on one favorite die.

The set also rewards consistency. If you clean and store the dice the same way after each session, you avoid the two most common problems: cloudy finish from leftover residue and chipped edges from dice knocking together in a loose bag.

  • Handle dice with clean, dry hands when you can.
  • Keep drinks and snacks off the same surface as the set.
  • Treat the rotating platform as part of the set, not just a display stand.

What you actually need

A microfiber cloth, a second cloth you can dampen, and a storage case with dividers cover almost everything. Avoid paper towels, which can leave lint and micro-abrasions on metal, and avoid abrasive pads or polishes unless the manufacturer specifically recommends them for your finish.

For storage, look for a case with individual slots, foam inserts, or soft dividers. A drawstring bag is fine for travel only if the dice are first wrapped or separated, because 64 metal pieces shifting together will rub against each other.

  • Soft microfiber cloths, one dry and one barely damp.
  • A padded case or box with dividers or foam.
  • A dry, room-temperature spot away from windows and radiators.

Cleaning without harming the finish

Start dry. Wipe each die with the dry microfiber cloth to remove dust and surface oil before introducing any moisture. For stubborn spots, breathe on the die or use the barely damp cloth, then dry immediately with the dry cloth. Never soak metal dice or leave them wet.

If your dice have painted or engraved markings, be gentle around those areas. Scrubbing hard can wear the fill or push grit into the recesses. A light pass is almost always enough for a 64-piece metal dice set that gets cleaned regularly.

  • Clean in small batches so you do not lose track of pieces.
  • Do not use vinegar, bleach, or harsh household cleaners.
  • Dry each die fully before it goes back in storage.

Storing the full 64-piece set

The goal is separation and dryness. Store the dice in a case with slots or dividers so pieces cannot slide into each other, and keep the rotating platform in its own space if your setup allows. If you use a bag, wrap sections of dice in soft cloth first.

Pick a storage spot that stays dry and out of direct sun. Humidity can affect metal over time, and heat can soften some finishes or case foams. A shelf or drawer at room temperature is better than a garage, basement, or windowsill.

  • Never store the set loose with other metal dice or loose change.
  • Keep the case closed when not in use to limit dust.
  • Do a quick piece count before and after storage so nothing goes missing.

Travel and table habits that protect the set

At the table, give the dice a defined area. A dice tray or mat cushions rolls and keeps metal from hitting bare wood or glass. That matters for the table as much as for the dice, since 64 metal pieces rolling freely can mark a surface.

When you pack up, do it the same way every time: dry wipe, full dry, then into the case. If you play TESSERACT often, a two-minute routine after each session is far easier than a deep clean later.

  • Use a padded tray or mat for rolling.
  • Carry the case flat rather than letting it tumble in a bag.
  • Wipe the rotating platform as well as the dice.

Your after-game care steps

  1. Step 1: Clear the table and count the dice: Collect all 64 dice and the rotating platform before anything else. Count them against your usual total. Checkpoint: if the count is short, search the tray, floor, and table edges before storing anything.
  2. Step 2: Dry-wipe every die: Use a dry microfiber cloth on each die, turning it as you go so all faces are wiped. Common mistake: skipping the dry pass and going straight to a damp cloth, which can smear oils instead of removing them.
  3. Step 3: Spot-clean only where needed: For stubborn marks, use a barely damp cloth, then dry the die immediately with the dry cloth. Checkpoint: the die should feel completely dry before it moves to storage.
  4. Step 4: Wipe the rotating platform: Clean the platform and any contact points so grit does not transfer back onto the dice next session. Common mistake: cleaning the dice but leaving the platform dusty.
  5. Step 5: Store with separation and dryness: Place dice in a padded case with slots or dividers, keeping the platform in its own space. Store at room temperature away from sun and moisture. Checkpoint: shake the closed case gently. If you hear metal knocking, add more dividers or padding.

Product facts that shape the routine

A 64-piece metal dice set stays in good shape when the routine is short and repeatable: dry wipe, spot clean, dry fully, and store with separation. Do that after each TESSERACT session and the set will keep its finish and stay ready to play.