Quick answer
Clean your Therm-a-Rest NeoAir XTherm NXT with mild soap and water, store it partially inflated in a dry place, and use the included repair kit for small punctures.
Why proper care matters for an ultralight pad
The Therm-a-Rest NeoAir XTherm NXT is built for extreme conditions with a 6.9 R-value and a 2.5-inch thickness, but its lightweight construction needs gentle handling. Dirt, moisture, and improper storage can degrade the fabric or valve over time, reducing insulation and comfort.
Regular maintenance ensures the Triangular Core Matrix continues to deliver the best warmth-to-weight ratio on the market. A few minutes of care after each trip can add years to the pad's life.
Diagnosis and care steps
- Symptom: Pad loses air overnight: Inflate the pad fully, listen for hissing near the valve and seams, or submerge it in water to spot bubbles. Mark the leak with a pen. If you find a leak, proceed to repair. If no leak, check the valve seal.
- Likely cause: Dirt or debris on valve or small puncture: Clean the valve area with a damp cloth. For a puncture, use the included patch kit: clean the area, apply adhesive, press patch firmly, and let cure for 12 hours. If the patch doesn't hold after 24 hours, the pad may have a larger tear requiring professional repair or replacement.
- Corrective action: Clean and store properly: After each trip, wipe the pad with a mild soap solution (no bleach or solvents), rinse, and air dry completely. Store it partially inflated in a cool, dry place away from direct sunlight.
Product facts
-
Therm-a-Rest NeoAir® XTherm™ NXT Sleeping Pad: The Therm-a-Rest NeoAir XTherm NXT has a 6.9 R-value and uses a Triangular Core Matrix for the best warmth-to-weight ratio of any air sleeping pad. Because the pad is ultralight, the fabric is thin and requires careful cleaning and storage to avoid punctures or delamination.
Therm-a-Rest NeoAir® XTherm™ NXT Sleeping Pad
