One spike, two coverage stages, one permanent choice

The Under Tree Sprinkler Spike is a single emitter designed to water trees and large plants from below the canopy. Its most important buying detail is the two-stage deflector: with the deflector attached, it delivers a focused 1.6-meter diameter spray for smaller or newly planted trees. Remove the deflector and coverage expands to a wide 5-meter diameter as the root system grows.

That adjustability is also the trade-off. Once the deflector is removed it cannot be re-attached, so the decision is effectively permanent for that spike. If you are planting a tree you expect to move, or you want to start small and reassess, buy the spike knowing you are choosing a long-term layout rather than a reversible setting.

What the spike includes and what it does not

  • Irrigation Kit | Under Tree Sprinkler Spike: Each spike comes with a 600mm length of 4mm micro tubing pre-fitted, and no additional 4mm tubing is required for installation into mainline tubing. This is the main compatibility question for anyone adding a spike to an existing line: the connection length is already on the spike, so you are not budgeting for a separate micro-tubing run.

    Irrigation Kit | Under Tree Sprinkler Spike

    Irrigation Kit | Under Tree Sprinkler Spike

  • Irrigation Kit | Under Tree Sprinkler Spike: The product contains a single Under Tree Sprinkler Spike only; additional components are sold separately. If you are watering several trees, count spikes per tree rather than assuming a kit quantity. The Under Tree Sprinkler Irrigation Kit is the multi-component option; the individual spike is for expanding or adding to an existing system.

When the individual spike makes more sense than the kit

Buy the individual spike when your mainline is already in place and you want to extend coverage to one more tree or a larger garden bed. It is also the sensible spare if a single emitter in an existing Under Tree Sprinkler Irrigation Kit stops performing as expected.

Buy the kit instead when you are starting from scratch, because the spike alone does not include the other components needed for a complete installation. The spike is a component, not a standalone watering system, and the supplied information does not list every part required beyond the pre-fitted micro tubing.

Sprinkler spike placement: match the spray to the root zone

  • Newly planted or small trees: Keep the deflector attached for the focused 1.6-meter diameter spray. This concentrates water over a smaller root area instead of spreading it beyond the young root system.
  • Mature trees and expansive beds: Remove the deflector for the wide 5-meter diameter pattern. The 360° spray is intended to apply water evenly across the root area as it expands, which is why the spike suits orchards and larger trees.
  • Position relative to the trunk: The supplied information describes coverage diameters but does not specify a distance from the trunk. Use the spray diameter as your guide and check the pattern on your own soil before committing the spike to a final position.
  • Holes in 13mm poly pipe: The end of the spike can be used as a punch to create holes in 13mm poly pipe, so you can make the connection point with the same tool rather than hunting for a separate punch.

Deflector on or off: the decision at a glance

The two configurations serve different stages of tree growth, but only one transition is possible per spike.

  • Deflector attached: 1.6-meter diameter focused spray. Best for smaller or newly planted trees. Reversible only in the sense that you can remove it later; it cannot be refitted once removed.
  • Deflector removed: 5-meter diameter wide spray. Suits mature trees and larger garden beds. Permanent change for that spike.

A realistic note before you buy

The spike is a well-specified emitter for tree watering, but it is not a complete irrigation kit and the supplied information does not include installation steps, recommended spacing between spikes, or pressure requirements. If you need those details, check the mainline and kit documentation you already have rather than assuming the spike sets them.

For a shade garden or a bed with several trees, plan the layout around the 1.6-meter and 5-meter coverage stages before you remove any deflectors. That single irreversible step is the one worth getting right at the buying stage.